Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TRIPLE SUGAR IRON AGAR
- Product Code
- CM0277
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Oxoid Ltd
manufacturer
Wade Road, Basingstoke, Hants, UK, RG24 8PW
+44 (0) 1256 841144
Emergency Contacts
Carechem 24
+44 (0) 1865 407333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Get medical attention if symptoms occur.
Wash off with warm water and soap. If symptoms persist, call a physician.
Rinse thoroughly with plenty of water, also under the eyelids. If eye irritation persists, consult a specialist.
Clean mouth with water and drink afterwards plenty of water. Obtain medical attention.
Immediate Medical Attention
If eye irritation persists, consult a specialist. If symptoms persist, call a physician. Obtain medical attention. Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so.
Sweep up or vacuum up spillage
Materials: suitable container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Do not breathe dust. Avoid contact with skin and eyes.
Keep container tightly closed in a dry and well-ventilated place. Protect from moisture.
Avoid contact with skin and eyes.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source
Protective gloves. Glove material: Disposable gloves. Breakthrough time: See manufacturers recommendations. Glove thickness: -. EU standard: EN 374. Glove comments: (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information) Ensure gloves are suitable for the task: Chemical compatibility, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
Safety glasses with side-shields (European standard - EN 166)
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. In case of insufficient ventilation wear suitable respiratory equipment. Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. When RPE is used a face piece Fit Test should be conducted
Long sleeved clothing
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions: Hygroscopic
None known, based on information available
None under normal processing. Hazardous polymerization does not occur.
Heat, flames and sparks. Keep away from direct sunlight.
Strong oxidizing agents.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TRIPLE SUGAR IRON AGAR?
The signal word is no signal word.
What is the physical form of TRIPLE SUGAR IRON AGAR?
TRIPLE SUGAR IRON AGAR is a powder appearing as pink with pink color. It has no information available odor.
What is TRIPLE SUGAR IRON AGAR used for?
Laboratory chemicals.
What is the melting point of TRIPLE SUGAR IRON AGAR?
The melting point is No data available and the boiling point is Not applicable.