Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- VIDAS Lyme IgM - STR (X10)
- Product Code
- 30319
- Synonyms
- None.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostic medical device
Uses advised against
None known.
Manufacturers & Suppliers
bioMerieux UK Limited
distributor
Grafton Way, Basingstoke, Hampshire RG22 6HY
(44) 1256.461881
bioMérieux SA
manufacturer
Chemin de l'Orme - 69280 Marcy-l'Etoile - France
+33(0)478877656
Emergency Contacts
Emergency Contact
999
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diethanolamine EC: 203-868-0 | 111-42-2 | 5 - 10% | Yes |
Notes
The full text for all R- and H-phrases is displayed in section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Call a physician if symptoms develop or persist.
Wash off with soap and water. Get medical attention if irritation develops and persists.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician or poison control centre immediately.
Symptoms: Irritation of eyes, stinging, tearing, redness, swelling, and blurred vision.
Rinse mouth. Get medical attention if symptoms occur.
Immediate Medical Attention
Call a physician or poison control centre immediately for eye contact. Get medical attention if symptoms develop or persist for inhalation, skin contact, or ingestion.
Medical Treatment
Provide general supportive measures and treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Not available.
No unusual fire or explosion hazards noted.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unnecessary personnel away.
Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Avoid discharge into drains, water courses or onto the ground.
Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Materials: vermiculite, dry sand, earth, absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapour. Do not get this material in contact with eyes. Avoid prolonged exposure. Wear appropriate personal protective equipment.
Storage temperature: between 2 °C and 8 °C. Store away from incompatible materials (see Section 10 of the SDS).
Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Provide eyewash station.
Use protective gloves made of: Nitrile.
Wear eye/face protection.
Do not breathe dust/fume/gas/mist/vapors/spray. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Wear suitable protective clothing.
Environmental manager must be informed of all major releases.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
stable under normal conditions of use, storage and transport.
non-reactive under normal conditions of use, storage and transport.
No dangerous reaction known under conditions of normal use.
Contact with incompatible materials.
Strong acids.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is VIDAS Lyme IgM - STR (X10) known by?
VIDAS Lyme IgM - STR (X10) is also known as: None.
What is the hazard signal word for VIDAS Lyme IgM - STR (X10)?
The signal word is danger.
What is the physical form of VIDAS Lyme IgM - STR (X10)?
VIDAS Lyme IgM - STR (X10) is a liquid. with colourless to light yellow. color. It has not available. odor.
What is the solubility of VIDAS Lyme IgM - STR (X10)?
Not available.
What is VIDAS Lyme IgM - STR (X10) used for?
In vitro diagnostic medical device
What are the hazard statements for VIDAS Lyme IgM - STR (X10)?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.
What is the melting point of VIDAS Lyme IgM - STR (X10)?
The melting point is Not available. and the boiling point is Not available..