Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Deb Instant Foam
- Product Code
- IFS1TF-US, IFS50ML-US, IFS400ML-US, IFS1L-US
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Deb USA, Inc.
1100 South Highway 27, Stanley, North Carolina 28164 USA
704-263-4240
DEB Worldwide Healthcare Inc
manufacturer
76 Adams Boulevard, Brantford, Ontario, N3S 7V2
519-759-1051
Emergency Contacts
Chemtrec
800 424 9300
24 hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ETHANOL | 64-17-5 | 60 - 100% | Yes |
Notes
Alcohol, Water, Bis-PEG 12 Dimethicone, Coco-Glucoside, Glyceryl Oleate, PEG-200 Hydrogenated Glyceryl Palmate. PEG-7 Glyceryl Cocoate, Behentrimonium Chloride, Dihydroxypropyl PEG-5 Linoleammonium Chloride
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing.
Symptoms: No specific symptoms known.
Remove contaminated clothing.
Symptoms: None known.
Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention promptly if symptoms occur after washing.
Symptoms: May cause severe eye irritation.
DO NOT induce vomiting. Get medical attention immediately.
Symptoms: May cause nausea, headache, dizziness and intoxication.
Medical Treatment
No specific recommendations.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with alcohol-resistant foam, carbon dioxide or dry powder.
FLAMMABLE. Forms explosive mixtures with air.
Fight fire from safe distance or protected location. Containers close to fire should be removed or cooled with water.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not discharge into drains or watercourses or onto the ground.
Absorb spillage with non-combustible, absorbent material. Collect and place in suitable waste disposal containers and seal securely.
Materials: non-combustible, absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, sparks and open flame. Avoid contact with eyes.
Store in tightly closed original container in a dry, cool and well-ventilated place.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not relevant.
Not applicable.
Not required normally but wear eye protection if you are conducting an operation where there is a risk of this product getting in the eyes.
Not relevant.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No particular stability concerns.
There are no known reactivity hazards associated with this product.
Not known.
Avoid heat, flames and other sources of ignition.
Oxidising Agents Aluminium
Oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
The product is not expected to be toxic to aquatic organisms.
Persistence and degradability
The product is biodegradable.
Bioaccumulative potential
The product is not bioaccumulating.
Mobility in soil
The product is soluble in water.
Results of PBT and vPvB assessment
The product does not contain any substances classified as PBT or vPvB.
Other adverse effects
None known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1987
- Shipping Name
- ALCOHOLS, N.O.S.
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The ingredients of this product are on the TSCA Inventory. This product is manufactured and labeled in compliance with the Federal Food, Drug, and Cosmetic Act, and is exempt from the labeling requirements of the OSHA Hazard Communication Standard.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Deb Instant Foam?
The signal word is warning.
What is the physical form of Deb Instant Foam?
Deb Instant Foam is a liquid appearing as clear liquid. with colorless. color. It has alcoholic. odor.
What are the hazard statements for Deb Instant Foam?
This substance has 1 hazard statement:
- H226: Flammable liquid and vapor.
What is the melting point of Deb Instant Foam?
The melting point is Not Applicable°C and the boiling point is 78°C.