Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- D-STROY
- Product Form
- liquid
- Product Code
- 126532
Regulatory Identifiers
- CAS Number
- N/A
Emergency Contacts
CHEMTREC
800-424-9300
24 Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bacterial Concentrate | --- | 1% | Yes |
| Linear Alcohol Ethoxylate | 68439-46-3 | 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: eye irritation
Rinse mouth. Do NOT induce vomiting.
Immediate Medical Attention
Get medical advice (if eye irritation persists), Get medical attention (if skin irritation occurs), call a POISON CENTER or physician if you feel unwell (if swallowed).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon Dioxide, dry chemical, foam.
Wear a self-contained breathing apparatus with full protective clothing.
Firefighter Protection
Wear a self-contained breathing apparatus with full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate area. Halt spill at source, dike and contain spill.
Flush with plenty of water to drain.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in dry place. Store locked up.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use general or local ventilation to keep exposure levels below exposure limits.
For repeated or prolonged contact, wear chemically impervious gloves such as Nitrile.
Wear approved safety glasses or goggles with unperforated eyeshields where splashing may occur.
Normal room ventilation is adequate. Use a NIOSH/MHSA approved respirator if exposure limits are exceeded.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Will not occur.
Heating and freezing.
Strong acids or bases may deactivate.
Carbon Dioxide, Carbon Monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of container in accordance with all Federal, State and Local Regulations regarding waste disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
HMIS RATING: HEALTH = 1 FLAMMABILITY = 0 REACTIVITY = 0 PPE = B; WHMIS RATING: Class D, Division 2B
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for D-STROY?
The signal word is warning.
What is the physical form of D-STROY?
D-STROY is a liquid. appearing as milky white . It has mild. odor.
What are the hazard statements for D-STROY?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H316: Causes mild skin irritation.
- H320: Causes eye irritation.