NextSDS Logo
Safety Data Sheet EN

Fix ALL Flexi

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Fix ALL Flexi
Product Code
131481, 131482, 131082
Synonyms
Grey - 290 mL, White - 290 mL, White - 125 mL

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Professional use, Consumer use, Sealants

Manufacturers & Suppliers

S

Soudal Pty Ltd

manufacturer

75 Owen St, Glendenning, NSW 2761, Australia

1300 507 011

Emergency Contacts

Soudal Pty Ltd

1300 507 011

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Trimethoxyvinylsilane 2768-02-7 0.1 - 1% No
N-(3-(trimethoxysilyl)propyl)ethylenediamine 1760-24-3 0.1 - 1% No
dioctylbis(pentane-2,4-dionato-O,O')tin 54068-28-9 0.1 - 1% No
bis(2,2,6,6-tetramethyl-4-piperidyl)sebacate 52829-07-9 0.1 - 1% No
Ingredients determined to be Non-Hazardous --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.

Skin contact

If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.

Symptoms: swelling, redness, blistering or irritation

Eye contact

If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek medical advice.

Ingestion

Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice.

Immediate Medical Attention

Seek medical advice if effects persist (inhalation), if swelling, redness, blistering or irritation occurs (skin), or in all cases of eye contamination. Seek medical advice after ingestion.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

If material is involved in a fire use water fog (or if unavailable fine water spray), alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder).

Specific hazards

Non-combustible material.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Small spills: Wipe up with absorbent. Large spills: Clear area, work upwind or increase ventilation, cover with damp absorbent, sweep or vacuum up.

Small spill

Wipe up with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or drums for disposal.

Large spill

Clear area of all unprotected personnel. Slippery when spilt. Clean up immediately. Work up wind or increase ventilation. Cover with damp absorbent. Sweep or vacuum up, but avoid generating dust. Collect and seal in properly labelled containers or drums for disposal.

Environmental

If contamination of crops, sewers or waterways has occurred advise local emergency services.

Cleanup methods

Wipe up, sweep or vacuum up.

Materials: absorbent (clean rag or paper towels), damp absorbent (inert material, sand or soil)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of dust.

Storage

Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition. Keep container standing upright. Keep containers closed when not in use - check regularly for spills.

Fire prevention

Store away from sources of heat and/or ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Natural ventilation should be adequate under normal use conditions.

Hands

Gloves. Available information suggests that gloves made from nitrile rubber, polyethylene should be suitable for intermittent contact.

Eyes

Safety glasses.

Skin/Body

Overalls.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Vapor Density
---
Solubility In Fat
---
Solubility In Water
Insoluble
Softening Point
---
Colour
Variable in colour, depending on the composition
Physical State Data
solid
Solubility
Organic solvents
Freezing Point
---
Crystallisation Point
---
Relative Density
---
Solidification Point
---
Odor Threshold
N Av
Vapor Pressure
N Av
Physical State
Solid
Melting Point
N Av
Voc Content
< 1 %
Lower Explosive Limit
---
Appearance
---
Ph
N Av
Relative Evaporation Rate
---
Bulk Density
---
Explosive Limits
---
Metal Corrosion
---
Flammability
Not easily combustible
Boiling Point
N Av
Decomposition Temperature
---
Molecular Weight
---
Density
1.045 g/l (20°C)
Kinematic Viscosity
---
Flash Point
N Av
Properties Status
---
Upper Explosive Limit
---
Auto Ignition Temperature
N Av
Dynamic Viscosity
---
Odor
Characteristic
State Under Standard Conditions
---
Form
Solid
Evaporation Rate
---
Cloud Point
---
Partition Coefficient
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This material is thermally stable when stored and used as directed.

Hazardous reactions

No known hazardous reactions.

Avoid

Elevated temperatures and sources of ignition.

Incompatible

Oxidising agents.

Decomposition

Oxides of carbon and nitrogen, smoke and other toxic fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Fix ALL Flexi known by?

Fix ALL Flexi is also known as: Grey - 290 mL, White - 290 mL, White - 125 mL

What is the hazard signal word for Fix ALL Flexi?

The signal word is no signal word.

What is the physical form of Fix ALL Flexi?

Fix ALL Flexi is a solid with variable in colour, depending on the composition color. It has characteristic odor.

What is the solubility of Fix ALL Flexi?

Organic solvents

What is Fix ALL Flexi used for?

Professional use, Consumer use, Sealants

What is the melting point of Fix ALL Flexi?

The melting point is N Av and the boiling point is N Av.