Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Collodion, Collodion HV
- Product Code
- MD0002/MD0014-EU
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Medical skin coating Special effects skin coating
Uses advised against
No information available
Manufacturers & Suppliers
Mavidon Medical Products
manufacturer
110 Commercial Blvd, Flat Rock NC 28731
800-654-0385
Emergency Contacts
INFOTRAC
1-352-323-3500
24 hr
INFOTRAC
1-800-535-5053
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. IF exposed or concerned: Get medical advice/attention.
Symptoms: Inhalation of high vapour concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Symptoms: Redness and tearing of the eyes.
Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Call a doctor.
Immediate Medical Attention
Get medical advice/attention if exposed or concerned. Get medical attention if eye irritation develops and persists. Call a doctor if ingested.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.
Do not scatter spilled material with high pressure water streams.
Risk of ignition. Keep product and empty container away from heat and sources of ignition. In the event of fire, cool tanks with water spray.
CAUTION: Use of water spray when fighting fire may be inefficient.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Keep people away from upwind of spill/leak. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in the immediate area). Pay attention to flashback. Take precautionary measures against static discharges. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material.
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.
Take precautionary measures against static discharges. Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protection equipment. Avoid breathing vapours or mists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use with local exhaust ventilation. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to package label instructions. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Remove contaminated clothing and shoes. In case of insufficient ventilation, wear suitable respiratory equipment.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Store locked up.
Do not eat, drink or smoke when using this product. Contaminated work clothing must not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Avoid contact with skin, eyes or clothing. Wear suitable gloves and eye/face protection.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Keep in an area equipped with sprinklers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No information available.
Wear suitable gloves. Impervious gloves.
Tight sealing safety goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron. Antistatic boots.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing. Hazardous polymerisation does not occur.
Sensitivity to static discharge: Yes.
Strong acids. Strong oxidising agents.
Decomposition will not occur if handled and stored properly. In case of fire, oxides of carbon, hydrocarbons, fumes or vapors, and smoke may be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2059
- Shipping Name
- NITROCELLULOSE SOLUTION, FLAMMABLE
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Collodion, Collodion HV?
The signal word is danger.
What is the physical form of Collodion, Collodion HV?
Collodion, Collodion HV is a liquid appearing as very viscous amber liquid clear with amber color. It has ether. odor.
What is Collodion, Collodion HV used for?
Medical skin coating Special effects skin coating
What are the hazard statements for Collodion, Collodion HV?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour
- H302: Harmful if swallowed
- H336: May cause drowsiness or dizziness
- H411: Toxic to aquatic life with long lasting effects
What is the melting point of Collodion, Collodion HV?
The melting point is No data available and the boiling point is 35.6 °C.