Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1-Ethyl-3-methylimidazolium Tetrafluoroborate
- Product Code
- E0496
Regulatory Identifiers
- CAS Number
- 143314-16-3 Check regulations →
Identified Uses
Use as laboratory reagent
Manufacturers & Suppliers
TCI EUROPE N.V.
manufacturer
Boereveldseweg 6 - Haven 1063, B-2070 Zwijndrecht, Belgium
+32 (0)3 735 07 00
Emergency Contacts
Emergency Contact
+44 844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substance name : 1-Ethyl-3-methylimidazolium Tetrafluoroborate
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-Ethyl-3-methylimidazolium Tetrafluoroborate | 143314-16-3 | 90 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician.
Take off all contaminated clothing immediately. If on skin, rinse well with water. If skin irritation or rash occurs: Get medical advice/ attention.
Rinse with plenty of water. If easy to do, remove contact lens, if worn. Immediately call a POISON CENTER or doctor/ physician.
Immediately call a POISON CENTER or doctor/ physician. Rinse mouth. Do NOT induce vomiting.
Immediate Medical Attention
Immediately call a POISON CENTER or doctor/ physician.
Medical Treatment
None known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder, Foam, Water spray, Carbon dioxide (CO2)
No information available.
Immediately evacuate personnel to safe areas. Remove undamaged containers from fire area if it is safe to do so.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc.
Prevent product from entering drains.
Collect as much of the spill as possible with a suitable absorbent material.
Related Products
Similar products with comparable safety profiles
4-Bromobenzenediazonium Tetrafluoroborate
---
Ammonium tetrafluoroborate
CAS: 13826-83-0
1-Chloro-2,2,2-trifluoroethyl difluoromethyl ether
CAS: 26675-46-7
1-Bromo-1-chloro-2,2,2-trifluoroethane
CAS: 151-67-7
2-Chloro-1,1,2-trifluoroethyl difluoromethylether
CAS: 13838-16-9
Boron trifluoride
CAS: 7637-07-2
4-Fluorobenzene-1-diazonium tetrafluoroboranuide
CAS: 459-45-0
Fluoromethyl 1,1,1,3,3-hexafluoroisopropylether
CAS: 28523-86-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Wash hands and face thoroughly after handling.
Keep container tightly closed. Store in a cool and shaded area. Store locked up.
Wash hands and face thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Install a closed system or local exhaust. Also install safety shower and eye bath.
Impervious gloves
Safety glasses, Safety goggles, Face-shield
Gas mask Self-contained breathing apparatus
Impervious protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available
None under normal processing.
Exposure to moisture
Oxidizing agents
Carbon monoxide, Carbon dioxide (CO2), Nitrogen oxides (NOx), Boron oxides, Hydrogen fluoride
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1760
- Shipping Name
- CORROSIVE LIQUID, N.O.S.
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1-Ethyl-3-methylimidazolium Tetrafluoroborate?
The signal word is danger.
What is the physical form of 1-Ethyl-3-methylimidazolium Tetrafluoroborate?
1-Ethyl-3-methylimidazolium Tetrafluoroborate is a liquid with colourless - yellow color. It has no data available odor.
What is the solubility of 1-Ethyl-3-methylimidazolium Tetrafluoroborate?
No data available
What is 1-Ethyl-3-methylimidazolium Tetrafluoroborate used for?
Use as laboratory reagent
What are the hazard statements for 1-Ethyl-3-methylimidazolium Tetrafluoroborate?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
What is the melting point of 1-Ethyl-3-methylimidazolium Tetrafluoroborate?
The melting point is 15 °C and the boiling point is No data available.