Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kieselguhr soda ash flux calcined
- Chemical Name
- Kieselguhr soda ash flux calcined
Regulatory Identifiers
- CAS Number
- 68855-54-9 Check regulations →
- EC Number
- 272-489-0 Check regulations →
- REACH No.
- 01-2119488518-22-0006
Identified Uses
Fillers, Processing aid, not otherwise listed, filtration material, Laboratory chemicals, pH-regulating agents, Plating agents and metal surface treating agents, Solvents, filter-aid, functional filler, functional additive.
Manufacturers & Suppliers
DICALITE TRADING nv
distributor
SCHEEPZATESTRAAT 100, B-9000 GENT
+32-9.250.95.50
http://www.dicalite-europe.com
Dicalite Trading nv
Scheepzatestraat 100, B-9000 Gent
+32-9 250 95 50
Emergency Contacts
Emergency Contact
+32-9 250 95 50
Emergency Contact
+32-473 54 06 53
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Kieselguhr soda ash flux calcined EC: 272-489-0 | 68855-54-9 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move patient from contaminated area to fresh air. In case of persistent problems consult a physician. If dust inhalation is severe move operator to fresh air.
Symptoms: Breathing dust containing crystalline silica over a prolonged period of time may cause lung damage. Crystalline silica (Cristobalite) is a known cause of silicosis, a progressive, sometimes fatal lung disease.
Wash the skin with soap and water.
Wash immediately, abundantly and thoroughly with water. If irritation persists, consult a physician
Rinse mouth with plenty of water. Do not induce vomiting.
Immediate Medical Attention
Not applicable.
Medical Treatment
Not applicable.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product is not flammable. Fire prevention measures should be chosen according to the environment.
In the event of a fire, wear self-contained breathing apparatus.
Firefighter Protection
In the event of a fire, wear self-contained breathing apparatus. The self contained breathing apparatus may be required due to other agents, but is not required due to potential Kieselguhr exposure.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid generating airborne dust. Prevent product from entering drains
Pick up and arrange disposal without creating dust
Related Products
Similar products with comparable safety profiles
Calcined Kaolin, Chamotte
CAS: 92704-41-1
Calcined Kaolin
---
Chamotte, light weight chamotte, ground chamotte, concrete aggregate
---
Calcium Borate Frit Ground & Dried
---
Caustic Potash, Caustic Potash Flake, Caustic Potash Walnut, Caustic Potash 90%, Caustic Potash Briquettes 90%
---
High Alkali Frit Ground & Dried
---
High Alkaline Frit T
CAS: 65997-18-4
Diatomaceous earth (moler) granulated, calcined
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protective equipment when handling the substance.
Store in a dry place protected from moisture.
Do not to eat, drink and smoke in work areas. Wash hands after use. Remove contaminated clothing and protective equipment before entering eating areas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Refer to the engineering controls discussed in the exposure scenarios in Annex I.
Wear suitable hand protection depending on nature of the task.
Use safety goggles.
If dust is raised a respirator is recommended
Wear suitable work clothing
Dispose of waste in accordance with local and national regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
Stable under recommended storage conditions.
May react violently with Hydrofluoric acid.
Hydrofluoric acid- products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kieselguhr soda ash flux calcined?
The signal word is no signal word.
What is the physical form of Kieselguhr soda ash flux calcined?
Kieselguhr soda ash flux calcined is a solid with white to beige color. It has odourless odor.
What is Kieselguhr soda ash flux calcined used for?
Fillers, Processing aid, not otherwise listed, filtration material, Laboratory chemicals, pH-regulating agents, Plating agents and metal surface treating agents, Solvents, filter-aid, functional filler, functional additive.
What is the melting point of Kieselguhr soda ash flux calcined?
The melting point is > 450°C and the boiling point is Not applicable based on melting point.