Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- UMONIUM38 INSTRUMENTS
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Industrial use, Professional use, Consumer use. Industrial/Professional use spec : Hospital. Pharmaceutical industry. Professional uses: Public domain (administration, education, entertainment, services, craftsmen). Industrial. Use of the substance/mixture : Public sector. Health services. Professional uses: Public domain (administration, education, entertainment, services, craftsmen). Function or use category : Disinfectant, Medical devices
Uses advised against
No additional information available
Manufacturers & Suppliers
Laboratoire HUCKERT'S INTERNATIONAL
manufacturer
Avenue Lavoisier, 20-22, B-1300 WAVRE
+32 (0) 67 89 41 00
Emergency Contacts
Emergency Contact
+32 (0)70-245.245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alkyl (C12-16) dimethylbenzyl ammonium chloride (ADBAC/BKC (C12-16) EC: 270-325-2 | 68424-85-1 | 1 - 10% | Yes |
| Parfum | --- | 1 - 2% | Yes |
| Parfum | --- | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Assure fresh air breathing. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Do not allow product to spread into the environment. Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.
Keep only in the original container in a cool, well ventilated place away from : Keep away from sources of ignition. Keep container closed when not in use.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of repeated or prolonged exposure : In case of repeated or prolonged exposure : Wear protective gloves.
Chemical goggles or safety glasses
No special protection required where adequate ventilation is maintained
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not established.
No additional information available
Not established.
Direct sunlight. Extremely high or low temperatures.
Strong acids. Strong bases.
fume. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
MFAG-No : 127
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for UMONIUM38 INSTRUMENTS?
The signal word is warning.
What is the physical form of UMONIUM38 INSTRUMENTS?
UMONIUM38 INSTRUMENTS is a liquid with green. color. It has characteristic. odor.
What is the solubility of UMONIUM38 INSTRUMENTS?
Soluble in water.
What is UMONIUM38 INSTRUMENTS used for?
Main use category : Industrial use, Professional use, Consumer use. Industrial/Professional use spec : Hospital. Pharmaceutical industry. Professional uses: Public domain (administration, education, entertainment, services, craftsmen). Industrial. Use of the substance/mixture : Public sector. Health services. Professional uses: Public domain (administration, education, entertainment, services, craftsmen). Function or use category : Disinfectant, Medical devices
What are the hazard statements for UMONIUM38 INSTRUMENTS?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of UMONIUM38 INSTRUMENTS?
The melting point is No data available and the boiling point is 93 °C.