Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Promag RI & PR-I & PI
- Product Form
- granular / fines <1mm
- Product Code
- 07017 - PRI
- Synonyms
- Pyromag RI
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Flux used to remove sodium, calcium and lithium from wrought aluminum alloys.
Uses advised against
Not fit for use in anything related to human consumption.
Manufacturers & Suppliers
Pyrotek Engineering Materials Ltd.
manufacturer
Garamonde Drive Wymbush, Milton Keynes MK8 8LN UK
+44 (0) 1908 561155
Emergency Contacts
CHEMTREC London
+44-8708-200418
CHEMTREC London
+44-2038-073798
Emergency Telephone
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Potassium Chloride EC: 231-211-8 | 7447-40-7 | 50 - 60% | No |
| Magnesium Chloride EC: 232-094-6 | 7786-30-3 | 30 - 50% | No |
For the full text of the H-Statements mentioned in this Section, see Section 16 Use the indicated respiratory protection if the occupational exposure limit is exceeded and/or in case of product release (dust or vapors). Hygroscopic material. Keep product dry before insertion into molten metal. Explosion may result from sudden generation of steam.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Consult a physician.
Wash off with soap and water. If skin irritation persists, call a doctor.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. If symptoms persist, call a doctor.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Consult a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Water spray, pellets, Use extinguishing measures that are appropriate to local circumstances and the surrounding fire
None.
Thermal decomposition can lead to release of irritating gases and vapours
Firefighter Protection
Use personal protective equipment. In the event of fire and / or explosion do not breathe fumes. In a case of a chlorine release use the respirator type B as per EN 14387.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak.
Prevent further leakage or spillage if safe to do so.
Clean up promptly by sweeping or vacuum.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. Avoid contact with skin and eyes. Avoid dust formation. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Keep product dry before insertion into molten metal. Explosion may result from sudden generation of steam.
Store in original container. Protect against water and moisture. Keep container tightly closed in a dry and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Protective gloves.
Safety glasses with side-shields as per CEN/EN166:2001.
Respiratory protection is not necessary at normal handling, Avoid breathing dust, Dust mask EN149 - P3/FFP3 or (P2/FFP2) under dusty conditions.
Long sleeved clothing.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable.
None under normal processing.
Exposure to moisture. Keep product dry before exposure to molten metal. Explosion may result from sudden generation of steam.
Incompatible with oxidising agents. Strong acids.
Thermal decomposition can lead to release of irritating gases and vapours. Chlorine fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Promag RI & PR-I & PI known by?
Promag RI & PR-I & PI is also known as: Pyromag RI
What is the hazard signal word for Promag RI & PR-I & PI?
The signal word is no signal word.
What is the physical form of Promag RI & PR-I & PI?
Promag RI & PR-I & PI is a solid appearing as granules with light yellow, light grey color.
What is Promag RI & PR-I & PI used for?
Flux used to remove sodium, calcium and lithium from wrought aluminum alloys.
What is the melting point of Promag RI & PR-I & PI?
The melting point is Not applicable and the boiling point is Not applicable.