Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IPAC 404R
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial. For professional use only. Lubricant. Additive.
Uses advised against
No additional information available
Manufacturers & Suppliers
IPAC, Inc.
manufacturer
7600 Dublin Blvd. Suite 240 94568 Dublin, CA - USA
925-556-5530
Emergency Contacts
Emergency Contact
(800) 720-7949
7:00 AM – 5:00 PM - PST
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 60% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled and if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Rinse immediately with plenty of water.
Symptoms: pain, blinking or redness
Rinse mouth. Do NOT induce vomiting.
Immediate Medical Attention
Obtain medical attention if pain, blinking or redness persist. If symptoms persist, contact a doctor or physician.
Medical Treatment
All treatments should be based on observed signs and symptoms of distress in the patient.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Fire hazard: No specific fire or explosion hazard. Explosion hazard: Product is not explosive.
Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Wear fire/flame resistant/retardant clothing. Wear a self contained breathing apparatus. EN 469.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from sources of ignition - No smoking. Provide good ventilation in process area to prevent formation of vapour.
Keep only in the original container in a cool well ventilated place. Keep container closed when not in use.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid creating mist or spray. Avoid splashing.
Wear suitable gloves. nitrile rubber gloves. EN 374.
Use splash goggles when eye contact due to splashing is possible. EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment. Use an approved respirator equipped with oil/mist cartridges. EN 12083.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No additional information available
Hazardous polymerization will not occur.
Keep away from sources of ignition.
strong acids. Strong bases.
Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
Persistence and degradability
Moderately biodegradable. Not established.
12.3. Bioaccumulative potential
Bioaccumulative potential
Not established.
12.4. Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture does not meet the PBT or vPvB criteria of REACH, annex XIII.
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IPAC 404R?
The signal word is no signal word.
What is the physical form of IPAC 404R?
IPAC 404R is a liquid with dark amber color. It has mild. odor.
What is the solubility of IPAC 404R?
No data available
What is IPAC 404R used for?
Industrial. For professional use only. Lubricant. Additive.
What is the melting point of IPAC 404R?
The melting point is No data available and the boiling point is No data available.