NextSDS Logo
Safety Data Sheet EN

Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 1,6-hexanediyl ester

CAS 35074-77-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 1,6-hexanediyl ester
Chemical Name
Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 1,6-hexanediyl ester

Regulatory Identifiers

CAS Number
35074-77-2 Check regulations →

Manufacturers & Suppliers

C

CIBA - GEIGY LIMITED BASLE SWITZERLAND ADDITIVES DIVISION

manufacturer

Klybeckstrasse 141 4057 BASEL

(061) 696 11 11

Emergency Contacts

Emergency Contact

(061) 696 33 33

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Contains no dangerous substances according to Directive 67/548/EEC.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move affected person to fresh air.

Symptoms: Irritation of respiratory system or mucous membranes, indisposition.

Skin contact

Wash with plenty of soap and water. Do not use organic solvents.

Eye contact

Rinse immediately with water for at least 15 minutes.

Ingestion

Affected person should drink 500 - 800 ml water, if possible with suspended activated carbon for medical use. In case of spontaneous vomiting be sure that vomitus can freely drain because of danger of suffocation. Give water repeatedly. Artificial induction of vomiting should be restricted to first aid staff.

Immediate Medical Attention

In case of eye irritation, seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water mist; Carbon dioxide; Foam; Dry powder.

Unsuitable media

High pressure water jet.

Specific hazards

Thermal decomposition or burning may release oxides of carbon and other toxic gases or vapours.

Firefighter Protection

Use full protective clothing for chemicals and self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent contamination of soil, drains and surface waters.

Cleanup methods

Take up mechanically and place in suitable, closable container for disposal, avoiding formation of dust.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid dust formation and ignition sources. Do not eat, drink or smoke at the workplace.

Storage

Store in the original container securely closed and at room temperature.

Hygiene

Do not eat, drink or smoke at the workplace.

Fire prevention

Avoid ignition sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour
---
Properties Status
---
Cloud Point
---
Decomposition Temperature
---
Melting Point
94 - 108°C
Ph
---
Solubility In Fat
---
Physical State Data
solid
Metal Corrosion
---
Dynamic Viscosity
---
Molecular Weight
---
Odor
None.
Solubility In Water
<0.1 g/L at 23°C
Solidification Point
---
Kinematic Viscosity
---
Explosive Limits
---
Boiling Point
---
Crystallisation Point
---
Freezing Point
---
Odor Threshold
---
Flammability
---
Relative Evaporation Rate
---
Voc Content
---
Softening Point
---
Appearance
White crystalline powder.
Flash Point
280°C DIN 51584
Vapor Pressure
Ca.1-E-8 Pa at 20°C
State Under Standard Conditions
---
Relative Density
---
Form
crystalline powder
Evaporation Rate
---
Partition Coefficient
Log Pow >>6
Upper Explosive Limit
---
Bulk Density
---
Density
1.08 g/cm³ at 25°C
Physical State
solid
Vapor Density
---
Lower Explosive Limit
---
Colour Intensity
---
Auto Ignition Temperature
>360°C BAH
Solubility
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Avoid

Static discharges.

Incompatible

Strong acids, strong bases and strong oxidizing agents.

Decomposition

>350°C

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 1,6-hexanediyl ester?

The signal word is no signal word.

What is the physical form of Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 1,6-hexanediyl ester?

Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 1,6-hexanediyl ester is a solid appearing as white crystalline powder. . It has none. odor.

What is the melting point of Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 1,6-hexanediyl ester?

The melting point is 94 - 108°C .