Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P
- Product Form
- Mica sheets + tubes
- Synonyms
- Mica sheets + tubes consisting of Muscovite alternatively Phlogopite impregnated with a silicone resin and polymerized
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
construction of induction, arc or high frequency furnaces; high voltage applications; high thermal applications; industrial sealing + gasket industries (e.g. oil + gas distribution); heating elements for electrical + thermo mechanical equipment
Manufacturers & Suppliers
Saveway Isolierstoffe GmbH
manufacturer
Saveway Isolierstoffe GmbH
manufacturer
Industriestrasse 1 • 98716 Geraberg, Germany
+49 (3677) – 466 369 – 0
Saveway Handels GmbH
distributor
Auf dem Sande 13 • 98716 Geraberg, Germany
+49 (3677) – 844 572
Siamat Co., Ltd.
distributor
115/2 Moo. 5 • Naklua • Banglamung • Chonburi, Thailand 20150
+66 (86) – 112 6791
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| mica-group minerals EC: 215-479-3 | 12001-26-2 | 88.5 - 93.5% | No |
| rubber, silicone | 63394-02-5 | 6.5 - 11.5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
Symptoms: If experiencing respiratory symptoms
Wash with plenty of soap and water.
Symptoms: If skin irritation or a rash occurs
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: If eye irritation persists
Immediate Medical Attention
Get medical advice/attention if you feel unwell. If skin irritation or a rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. If experiencing respiratory symptoms: call a POISON CENTER or doctor/physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use CO₂, powder or water spray to extinguish.
In case of fire, the following can be released: Carbon monoxide (CO), carbon dioxide (CO₂), SiO₂, and other unknown poisonous substances.
DO NOT fight fire when fire reaches explosives. Fight fire with normal precautions from a reasonable distance.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Minimize airborne dust. Compressed air or dry sweeping should not be used for cleaning.
Avoid clean up procedures that could result in dust generation or water pollution.
Compressed air or dry sweeping should not be used for cleaning.
Related Products
Similar products with comparable safety profiles
SW-TEMP (sheets & rolls)
---
Sumflex Compounds (types: NG, NGX, PRX) Sumpol Compounds (types PP, PE, PP/PE)
---
SW-MESH
---
BONDERITE M-ZN 860XT R known as BONDERITE M-ZN 860X TUBING R
---
BONDERITE M-NT 2040 R2 JC35 RSE
---
MAPEFLEX P2 SL / A
---
MAPEFLEX P2 SL / A
---
BONDERITE M-ED SPEC S
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear protective gloves/protective clothing/eye protection/face protection. Do not handle until all safety precautions have been read and understood. If medical advice is needed, have product container or label at hand. Read label before use.
The product has to be stored flat, below temperatures of 23 °C and a relative humidity of 75 %. Atmosphere has also to be free of corrosive gases.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use engineering controls such as local exhaust ventilation, point of generation dust collection, down draft work stations, emission controlling tool designs, and materials handling equipment designed to minimize airborne fiber emissions. Review your applications in order to identify potential sources of dust exposure. If necessary, conduct personal air monitoring.
Wear protective gloves.
Wear eye protection/face protection.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
Wear protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Chemically inert
No dangerous reactions are expected when used as intended.
Avoid higher temperatures than room temperature (appr. 23°C). Not because of safety reasons, but it may change the properties.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P known by?
SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P is also known as: Mica sheets + tubes consisting of Muscovite alternatively Phlogopite impregnated with a silicone resin and polymerized
What is the hazard signal word for SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P?
The signal word is danger.
What is the physical form of SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P?
SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P is a solid appearing as solid, sheets or tubes with green / grey color. It has characteristic odor.
What is the solubility of SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P?
not soluble in water
What is SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P used for?
construction of induction, arc or high frequency furnaces; high voltage applications; high thermal applications; industrial sealing + gasket industries (e.g. oil + gas distribution); heating elements for electrical + thermo mechanical equipment
What are the hazard statements for SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P?
This substance has 4 hazard statements:
- H315: causes skin irritation
- H319: causes serious eye irritation
- H335: may cause respiratory irritation
- H372: causes damage to organs (Lungs) through prolonged or repeated exposure
What is the melting point of SW - Micanite flex M P, SW - Micanite rigid M P, SW - Temp, SW - Micanite rigid M P SOQ, SW - Foundry Special, SW - Therm M P, SW - Foundry Micanite, SW - Tube M P?
The melting point is >1330°C .