Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SW-TEMP (sheets & rolls)
- Product Form
- sheets & rolls
- Chemical Name
- mica laminates impregnated with a silicon resin and polymerized
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
SAVEWAY ISOLIERSTOFFE GMBH
manufacturer
IN DEN FOLGEN 43, D-98704 LANGEWIESEN, GERMANY
+49 (3677) 844 572
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The chemical characteristic of PHLOGOPITE MICA is $ KMg_{3}(AlSi_{3}O_{10})(OH)_{2} $
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mica | --- | 90% | No |
| Silicone resin | 12597-37-4 | 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
rinse affected areas with water and wash gently
Symptoms: skin irritation
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical, Carbon dioxide
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not applicable
Related Products
Similar products with comparable safety profiles
Termamyl® SC DS
---
S300 LS/S600 LS/S600 LS preshrunk/S600VD/S 1220 LS/S1220 VD/S600 T/S1220 T/S1220 preshrunk/S1400 preshrunk/needle felt/S600 PU/S600 Alufoil/S2026 V4A/S1400 and S1400 VD/tape
---
SW-MESH
---
S600VD/S1220VD/S600T/S1220T/S1020T/S1220 preshrunk/needlefelt S600PU/S1400VD/S1400 preshrunk
---
3810 THERMAL TRANSFER RIBBON - SMARTDATE
---
INTERSEAL 670HS PART B LOW TEMPERATURE
---
Supermag* Body Soluble Bulk, Blankets, Board and Modules
CAS: 436083-99-7
in-tem® S
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Dry and cool (To increase the durability not because of safety reasons.)
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
During working wear gloves.
Avoid skin- and eye contact.
Avoid skin- and eye contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Avoid higher temperatures than room temperature (appr. 23°C)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal is permitted at landfills licensed for industrial waste.
Disposal is permitted at landfills licensed for industrial waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Member States are in charge of implementing European Directives into their own national regulation within a period of time normally given in the Directive. Member States may impose more stringent requirements. Please always refer to any applicable regulation.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SW-TEMP (sheets & rolls)?
The signal word is no signal word.
What is the physical form of SW-TEMP (sheets & rolls)?
SW-TEMP (sheets & rolls) is a solid appearing as solid, sheets . It has characteristic odor.
What are the hazard statements for SW-TEMP (sheets & rolls)?
This substance has 1 hazard statement:
- May cause mild mechanical irritation to skin.
What is the melting point of SW-TEMP (sheets & rolls)?
The melting point is >1330°C .