Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Insulcoat 1260 RFL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For industrial use within high temperature applications. Coating for use with High Temperature Insulation Wools.
Uses advised against
No additional information available
Manufacturers & Suppliers
INSULCON B.V.
Zilverhoek 4, 4651 SP, STEENBERGEN, The Netherlands
+31 (0)167-565750
http://www.insulcon.com
INSULCON N.V.
Belgium
+32 (0)3 711 02 78
INSULCON GmbH
Germany
+49(0)2131-408548-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substance listed below with non-hazardous additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silicic acid, sodium salt EC: 215-687-4 | 1344-09-8 | 25 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, if you feel unwell seek medical advice
Wash skin with plenty of water. Take off contaminated clothing and wash before reuse. Take medical advice if skin irritation persists.
Symptoms: Irritation
Rinse cautiously with water for several minutes. Get medical advice/attention.
Symptoms: Irritation
Rinse mouth. Drink plenty of water. DO NOT induce vomiting. Obtain emergency medical attention.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product is not flammable. Use extinguishing media appropriate for surrounding fire. Foam, Dry Powder, Carbon Dioxide, Water spray
Do not use a heavy water stream.
Prevent firefighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prohibit unauthorised persons (non-emergency); Ensure operatives are trained to minimise exposures (emergency responders).
Prevent entry to sewers and public waters.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation, especially in confined areas. Obtain special instructions before use. Use personal protective equipment (PPE) as required. Avoid contact with skin, eyes and clothing. Avoid inhalation of vapours.
Product must only be kept in the original packaging. Keep container closed when not in use. Protect against frost.
Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep away from heat sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant PVC gloves (to European standard EN 374 or equivalent)
Safety glasses with side shields. Emergency eye wash fountains Should be available in the immediate vicinity of any potential exposure.
Liquid product: Inhalation unlikely. If dust are formed, wear appropriate mask.
Impervious clothing. Do not take work clothes home
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling and storage conditions.
Stable under normal conditions of use.
Reacts violently with strong acids, zinc.
No additional information available.
Acids, zinc.
Under normal conditions of storage and use, hazardous decomposition products should not be produced
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Insulcoat 1260 RFL?
The signal word is warning.
What is the physical form of Insulcoat 1260 RFL?
Insulcoat 1260 RFL is a liquid appearing as paste with grey color. It has no data available odor.
What is Insulcoat 1260 RFL used for?
For industrial use within high temperature applications. Coating for use with High Temperature Insulation Wools.
What are the hazard statements for Insulcoat 1260 RFL?
This substance has 3 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
What is the melting point of Insulcoat 1260 RFL?
The melting point is Not applicable and the boiling point is No data available.