Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DP-LUBRICANT RED
- Product Code
- 40700025, 40700057, 40700058
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For materialographic polishing
Manufacturers & Suppliers
Struers ApS
manufacturer
Pederstrupvej 84, DK-2750 Ballerup
+45 44 600 800
Emergency Contacts
Emergency Contact
+45 44 600 800
Only during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains: lubricants and water.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water EC: 231-791-2 | 7732-18-5 | 95 - 99% | No |
| Red dye (C. I. Acid Red 211) EC: 266-577-8 | 67109-27-7 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move into fresh air and keep at rest.
Rinse with water.
Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids widely.
Immediately rinse mouth and drink plenty of water. Keep person under observation.
Immediate Medical Attention
If irritation persists: Seek medical attention and bring along these instructions. If person becomes uncomfortable take to hospital along with these instructions.
Medical Treatment
Not known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
No specific precautions.
Firefighter Protection
Selection of respiratory protection for fire fighting: follow the general fire precautions indicated in the workplace.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid discharge into water courses or onto the ground.
Dam and absorb spillage with sand, sawdust or other absorbent.
Materials: sand, sawdust or other absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Observe good chemical hygiene practices.
Store in tightly closed original container. Store at room temperature.
Observe good chemical hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust is recommended.
Risk of contact: Wear protective gloves. Nitrile gloves are recommended.
Risk of splashes: Wear goggles/face shield.
Under normal conditions of use respiration protection should not be required.
No special precautions.
Not available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
None known.
None known.
None specific.
None known.
None in particular.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DP-LUBRICANT RED?
The signal word is no signal word.
What is the physical form of DP-LUBRICANT RED?
DP-LUBRICANT RED is a liquid appearing as red liquid with red color. It has odourless. odor.
What is the solubility of DP-LUBRICANT RED?
Soluble in: solvents and water
What is DP-LUBRICANT RED used for?
For materialographic polishing
What is the melting point of DP-LUBRICANT RED?
The melting point is 0°C and the boiling point is 102°C.