di-Phosphorus pentoxide extra pure

fresh air.

Symptoms: bronchitis

wash off with plenty of water. Immediately remove contaminated clothing. If available swab with polyethylene glycol 400.

rinse out with plenty of water.

Symptoms: Risk of corneal clouding. Risk of blindness!

make victim drink water (two glasses at most), avoid vomiting (risk of perforation).

Carbon dioxide (CO2), Dry powder, Sand

Water, Foam

Not combustible. Ambient fire may liberate hazardous vapours. Caution! in contact with water product releases: Strong acids.

Suppress (knock down) gases/vapours/mists with a water spray jet.

Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains.

Take up dry. Dispose of properly. Clean up affected area.

Observe label precautions.

Tightly closed. Dry. Recommended storage temperature see product label.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: > 480 min splash contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: > 480 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

required when dusts are generated. Recommended Filter type: Filter P 2 (acc. to DIN 3181) for solid and liquid particles of harmful substances The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Acid-resistant protective clothing

Do not empty into drains.

Sensitive to air.

See section 10.3

Risk of explosion with: hydrogen peroxide, perchloric acid, Alkaline earth metals. Risk of ignition or formation of inflammable gases or vapours with: combustible substances, Organic Substances, halogen oxides. Violent reactions possible with: Water, Alcohols, Sulphides, combustible substances, halogen-halogen compounds, halogen oxides, Hydrogen halides, halogens, Alkali metals, alkali salts, peroxi compounds, alkali oxides, Metals, metallic oxides, Ammonia, formic acid, acids

Exposure to moisture.

no information available

no information available