NextSDS Logo
Safety Data Sheet EN

VENTANA anti-Helicobacter pylori (SP48) Rabbit Monoclonal Primary Antibody

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
VENTANA anti-Helicobacter pylori (SP48) Rabbit Monoclonal Primary Antibody
Product Code
06425623001

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals, Refer to product literature for further details.

Manufacturers & Suppliers

R

Roche Diagnostics Deutschland GmbH

manufacturer

Sandhoferstrasse 116, 68305 Mannheim, Deutschland

+496217590

Emergency Contacts

Werkschutzzentrale Roche Diagnostics GmbH

+49(0)621-759-2203

Mainz

+49(0)6131-19240

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.

Precautionary Statements

P261 Avoid breathing mist or vapours.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves.
P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents/ container to an approved waste disposal plant.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1) 55965-84-9 0.0015 - 0.0025% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

Skin contact

If on skin, rinse well with water.

Symptoms: May cause an allergic skin reaction.

Eye contact

Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Ingestion

Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Rinse mouth with water.

Immediate Medical Attention

If symptoms persist, call a physician.

Medical Treatment

The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

High volume water jet

Specific hazards

No information available.

Instructions

Standard procedure for chemical fires.

Firefighter Protection

Wear self-contained breathing apparatus for firefighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.

Environmental

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.

Cleanup methods

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.

Storage

Keep container tightly closed in a dry and well-ventilated place.

Hygiene

Wash hands before breaks and at the end of workday.

Fire prevention

Normal measures for preventive fire protection.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

In case of contact through splashing: Material: Nitrile rubber, Break through time: > 30 min, Glove thickness: > 0,11 mm. In case of full contact: Material: butyl-rubber, Break through time: > 480 min, Glove thickness: > 0,4 mm. Remarks: The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Eyes

Eye wash bottle with pure water, Tightly fitting safety goggles

Skin/Body

Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Kinematic Viscosity
No data available
Melting Point
No data available
Vapor Pressure
No data available
Dynamic Viscosity
No data available
Softening Point
---
Lower Explosive Limit
No data available
Auto Ignition Temperature
No data available
Metal Corrosion
---
Odor Threshold
No data available
Freezing Point
---
Flash Point
does not flash
Explosive Limits
---
Relative Evaporation Rate
---
Decomposition Temperature
Hazardous decomposition products formed under fire conditions.
Partition Coefficient
No data available
Crystallisation Point
---
Solubility
---
Colour
light pink
Evaporation Rate
No data available
Properties Status
---
Solubility In Fat
---
Physical State
liquid
Physical State Data
liquid
Molecular Weight
---
Boiling Point
No data available
Odor
---
Relative Density
No data available
Vapor Density
---
Colour Intensity
---
Ph
7,3
Bulk Density
---
Appearance
liquid
Flammability
The product is not flammable., Does not sustain combustion.
Density
1,025 g/cm3
Upper Explosive Limit
No data available
Voc Content
---
Cloud Point
---
Solidification Point
---
State Under Standard Conditions
---
Solubility In Water
completely miscible
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

Reacts with the following substances: Oxidizing agents

Avoid

No data available

Incompatible

Oxidizing agents

Decomposition

No decomposition if stored and applied as directed. In case of fire hazardous decomposition products may be produced such as: Oxides of phosphorus

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for VENTANA anti-Helicobacter pylori (SP48) Rabbit Monoclonal Primary Antibody?

The signal word is warning.

What is the physical form of VENTANA anti-Helicobacter pylori (SP48) Rabbit Monoclonal Primary Antibody?

VENTANA anti-Helicobacter pylori (SP48) Rabbit Monoclonal Primary Antibody is a liquid appearing as liquid with light pink color.

What is VENTANA anti-Helicobacter pylori (SP48) Rabbit Monoclonal Primary Antibody used for?

Laboratory chemicals, Refer to product literature for further details.

What are the hazard statements for VENTANA anti-Helicobacter pylori (SP48) Rabbit Monoclonal Primary Antibody?

This substance has 1 hazard statement:

  • H317: May cause an allergic skin reaction.

What is the melting point of VENTANA anti-Helicobacter pylori (SP48) Rabbit Monoclonal Primary Antibody?

The melting point is No data available and the boiling point is No data available.