Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- STARPLEX GM 500 TF 1
- Product Form
- Mixture
- Product Code
- 08002054
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Industrial use Industrial/Professional use spec : Industrial
Uses advised against
No additional information available
Manufacturers & Suppliers
LUBRILOG SAS
manufacturer
ZI des Chasses 18, rue Nicolas Appert, P.O. Box 60261, 26106 Romans sur Isère, FRANCE
0475452600
Emergency Contacts
ORFILA
33 1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| A mixture of 3,3-dicyclohexyl-1,1'-methylenebis(4,1-phenylene)durea;3-cyclohexyl-1-(4-(4-(3-octadecyclureido)benzyl)phenylurea;3,3'dioctadecyl-1,1'-methylenebis(4,1-phenylene)durea EC: 406-530-2 | --- | 5% | Yes |
| Acide phosphorodithioïque, mélange d'esters O,O-bis(isobutyl et pentyl), sels de zinc EC: 270-608-0 | 68457-79-4 | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Get immediate medical advice/attention.
Symptoms: Cracking of the skin. Irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
Do NOT induce vomiting. Obtain emergency medical attention.
Immediate Medical Attention
Get immediate medical advice/attention (skin contact). Immediately call a POISON CENTER/doctor (eye contact). Obtain emergency medical attention (ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray.
Do not use a heavy water stream.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Use self-contained breathing apparatus and chemically protective clothing. acid-resistant protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters.
Absorb spilled material with sand or earth. Shovel into suitable and closed container for disposal.
Materials: sand or earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.
Store in original container. Store in a dry place. Store in a closed container.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective gloves. Type: Disposable gloves, Material: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes)
Chemical goggles or safety glasses
No personal breathing protective equipment is normally required
Wear suitable protective clothing. Materials for protective clothing: Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No additional information available
No dangerous reactions known under normal conditions of use.
No additional information available
Strong oxidisers.
Fluorophosgene. Hydrogen fluoride. Carbon monoxide. Carbon dioxide. Nitrogen oxides. Sulphur oxides. hydrogen sulphide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for STARPLEX GM 500 TF 1?
The signal word is no signal word.
What is the physical form of STARPLEX GM 500 TF 1?
STARPLEX GM 500 TF 1 is a solid with light brown. color. It has characteristic. odor.
What is the solubility of STARPLEX GM 500 TF 1?
Insoluble in water.
What is STARPLEX GM 500 TF 1 used for?
Main use category : Industrial use Industrial/Professional use spec : Industrial
What is the melting point of STARPLEX GM 500 TF 1?
The melting point is Not available and the boiling point is Not available.