Touch N Seal Gun Foam II Sealant Orange

If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

Symptoms: difficulty in breathing

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Use a rag to remove excess foam from skin and remove contaminated clothing. Use of a solvent, such as acetone (nail polish remover) or mineral spirits, may help in removing uncured foam residue from clothing or other surfaces (avoid eye contact). Cured foam may be physically removed by persistent washing with soap and water. If irritation develops, use mild skin cream. If irritation persists, obtain medical attention.

Symptoms: irritation

In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.

Symptoms: irritation

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Alcohol Foam, Carbon Dioxide, Dry Chemical, Water Spray or Fog, Water

Closed containers may burst if exposed to extreme heat or fire. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.

Use water spray to cool exposed surfaces.

Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Contain spilled material and remove with inert absorbent. Prevent product from entering drains. Soak up with inert absorbent material and dispose of as hazardous waste. Scrape up dried material and place into containers. Uncured product is very sticky, so carefully remove the bulk of the foam by scraping it up and then immediately remove residue with a rag and solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner, etc. Once the product has cured, it can only be removed physically by scraping, buffing, etc.

Prevent product from entering drains.

remove with inert absorbent, Scrape up dried material, remove the bulk of the foam by scraping it up, remove residue with a rag and solvent, physically by scraping, buffing

Materials: inert absorbent, rag and solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Make sure nozzle is directed away from yourself prior to discharge. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion. Wash thoroughly after handling. Contains isocyanates. See information supplied by the manufacturer. Persons allergic to isocyanates, and particularly those suffering from asthma or other respiratory conditions, should not work with isocyanates.

Store away from sources of ignition and heat. Protect material from direct sunlight. Keep containers tightly closed in a dry, cool and well-ventilated place. Do not store at temperatures above 120 °F (49 °C). Store containers away from excessive heat and freezing. Store away from caustics and oxidizers.

Wash thoroughly after handling.

Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames.

Stable under recommended storage conditions.

Exothermic reactions may occur with oxidizing agents, strongly alkaline and strongly acid materials.

Excessive heat and freezing. Keep away from open flames, hot surfaces and sources of ignition.

Open flames, hot surfaces and sources of ignition. Incompatible with strong bases and oxidizing agents.

Normal decomposition products, i.e., COx, NOx.