Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alex Plus Acrylic Latex Caulk Plus Silicone - All Colors
- Product Code
- 070798181014, 070798181281, 070798181366, 070798181557, 070798114401, 070798185557
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Caulking Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200 Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Medical/Poison Control
1-800-222-1222
Transportation/National Response Center
1-800-535-5053
Transportation/National Response Center
1-352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | Yes |
| Lubricating petroleum oil | 72623-86-0 | 5 - 10% | Yes |
| Petroleum distillates | 64741-88-4 | 1 - 5% | No |
| Solvent ref. light paraffinic | 64741-89-5 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If you experience difficulty in breathing, leave the area to obtain fresh air.
Symptoms: difficulty in breathing
In case of contact, wash skin immediately with soap and water.
In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.
Symptoms: irritation
If swallowed, do not induce vomiting.
Immediate Medical Attention
Get medical attention immediately if continued difficulty in breathing is experienced, if eye irritation persists, or if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
None Known.
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear. Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as necessary. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Scrape up dried material and place into containers.
Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Dispose of saturated absorbent or cleaning materials appropriately.
Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Scrape up dried material and place into containers.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Alex Plus Acrylic Latex Caulk Plus Silicone - Clear
---
Alex Fast Dry Acrylic Latex Caulk Plus Silicone
---
Alex Painters Acrylic Latex Caulk
---
DAP Silicone Max Premium All Purpose Silicone Sealant Colors
---
Kwik Seal Plus Premium Kitchen & Bath Adhesive Sealant - All Colors
---
Power Point 300 Advanced Acrylic Urethane Elastomeric Sealant - All Colors
---
Silicone Sealant – Acetoxy Cure – Clear, White & Colors
---
Kwik Seal Tub & Tile Adhesive Caulk - All Colors
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Wash thoroughly after handling.
Avoid excessive heat and freezing. Do not store at temperatures above 120 °F (49 °C). Store away from caustics and oxidizers.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Excessive heat and freezing.
strong bases and oxidizing agents.
Normal decomposition products, i.e., COx, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alex Plus Acrylic Latex Caulk Plus Silicone - All Colors?
The signal word is warning.
What is the physical form of Alex Plus Acrylic Latex Caulk Plus Silicone - All Colors?
Alex Plus Acrylic Latex Caulk Plus Silicone - All Colors is a solid appearing as paste with colored color. It has very slight ammonia odor.
What is Alex Plus Acrylic Latex Caulk Plus Silicone - All Colors used for?
Caulking Compound
What are the hazard statements for Alex Plus Acrylic Latex Caulk Plus Silicone - All Colors?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.