NextSDS Logo
Safety Data Sheet EN

Webpatch 90 Dry Mix

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Webpatch 90 Dry Mix
Product Code
7116201

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Repair Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200 Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535-5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Carc. Cat. 1A
STOT RE Cat. 2
STOT SE Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H332 Harmful if inhaled.
H350 May cause cancer.
H371 May cause damage to organs. classified Category 2 evidence from animal studies suggest harmful . Cell death, adverse change in biochemistry, haematology or urinalysis parameters, Central or peripheral nervous system and effects senses. Multifocal or diffuse necrosis, fibrosis or granuloma formation in organs.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P201 Obtain special instructions before use.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P270 Do no eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P308 + P311 IF exposed or concerned: Call a POISON CENTER/doctor/...
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Plaster of paris 26499-65-0 65 - 85% No
Limestone 1317-65-3 10 - 30% No
Quartz 14808-60-7 0.5 - 1.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If you experience difficulty in breathing, leave the area to obtain fresh air.

Symptoms: difficulty in breathing

Skin contact

Wash skin with soap and water for 15 minutes.

Eye contact

In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.

Symptoms: irritation

Ingestion

If swallowed, DO NOT INDUCE VOMITING.

Immediate Medical Attention

If continued difficulty is experienced (inhalation), get medical attention immediately. Get medical aid if symptoms persist (skin). Get medical attention immediately (eye). Get medical attention immediately (ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

No Information

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Sweep up excess powder. Place remaining powder into containers.

Environmental

No Information

Cleanup methods

Sweep up excess powder. Place remaining powder into containers.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Do not breathe dust. Removal of this product after use will result in the generation of Dust. If dry-sanded, exposure to dust may result in the build-up of material in eyes, ears, nose, and mouth which may cause irritation. While dry sanding, use of a NIOSH-approved dust mask is recommended. Wash thoroughly after handling.

Storage

Store away from caustics and oxidizers. Keep containers dry and tightly closed to avoid moisture absorption and contamination.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
N.A.
Lower Explosive Limit
N.A.
Properties Status
---
Bulk Density
---
Evaporation Rate
Not Applicable
Relative Evaporation Rate
---
Physical State
Powder
Solubility
---
Odor
Little or No
Kinematic Viscosity
---
Boiling Point
N.A. - N.A.
Voc Content
---
Auto Ignition Temperature
Not Established
Form
---
Vapor Pressure
Not Established
Colour
---
Dynamic Viscosity
Not Aplicable
Vapor Density
Not Applicable
Freezing Point
Not Applicable
State Under Standard Conditions
---
Density
2.91 - 2.91 g/cm3
Molecular Weight
---
Cloud Point
---
Metal Corrosion
---
Solubility In Fat
---
Ph
Not Applicable
Upper Explosive Limit
N.A.
Explosive Limits
---
Relative Density
---
Crystallisation Point
---
Appearance
White to Off-White
Colour Intensity
---
Odor Threshold
Not Established
Decomposition Temperature
Not Established
Solidification Point
---
Melting Point
---
Solubility In Water
Not Established
Partition Coefficient
Not Established
Softening Point
---
Flammability
Non-Flammable
Physical State Data
solid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Avoid

Do not breathe dust. Avoid dust formation in confined areas. Excessive heat and freezing.

Incompatible

Incompatible with strong bases and oxidizing agents.

Decomposition

Above 1450 degree C: SO2 and CaO.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Webpatch 90 Dry Mix?

The signal word is danger.

What is the physical form of Webpatch 90 Dry Mix?

Webpatch 90 Dry Mix is a powder appearing as white to off-white . It has little or no odor.

What is Webpatch 90 Dry Mix used for?

Repair Compound

What are the hazard statements for Webpatch 90 Dry Mix?

This substance has 4 hazard statements:

  • H332: Harmful if inhaled.
  • H350: May cause cancer.
  • H371: May cause damage to organs. classified Category 2 evidence from animal studies suggest harmful . Cell death, adverse change in biochemistry, haematology or urinalysis parameters, Central or peripheral nervous system and effects senses. Multifocal or diffuse necrosis, fibrosis or granuloma formation in organs.
  • H373: May cause damage to organs through prolonged or repeated exposure.