NextSDS Logo
Safety Data Sheet EN

Presto Patch Multi-Purpose Ready Mix

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Presto Patch Multi-Purpose Ready Mix
Product Code
7900401

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Spackling Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200, Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535-5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1A
STOT RE Cat. 2
STOT SE Cat. 2

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H350 May cause cancer.
H371 May cause damage to organs.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P201 Obtain special instructions before use.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P270 Do no eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P308 + P311 IF exposed or concerned: Call a POISON CENTER/doctor/...
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P314 Get medical advice/attention if you feel unwell.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 45 - 70% No
Plaster of paris 26499-65-0 45 - 70% No
Mica 12001-26-2 1 - 5% No
Quartz 14808-60-7 0.5 - 1.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If you experience difficulty in breathing, leave the area to obtain fresh air.

Skin contact

Wash skin with soap and water for 15 minutes.

Eye contact

In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.

Ingestion

If swallowed, DO NOT INDUCE VOMITING.

Immediate Medical Attention

If continued difficulty is experienced, get medical attention immediately. Get medical aid if symptoms persist. Get medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

No Information

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations.

Environmental

No Information

Cleanup methods

absorb with inert material and dispose of in accordance with applicable regulations

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Do not breathe dust. Removal of this product after use will result in the generation of Dust. If dry-sanded, exposure to dust may result in the build-up of material in eyes, ears, nose, and mouth which may cause irritation. While dry sanding, use of a NIOSH-approved dust mask is recommended. Wash thoroughly after handling.

Storage

Avoid excessive heat and freezing. Do not store at temperatures above 120 °F (49 °C). Store away from caustics and oxidizers. Keep containers tightly closed.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Upper Explosive Limit
N.E.
Odor Threshold
Not Established
State Under Standard Conditions
---
Solubility
---
Auto Ignition Temperature
Not Established
Voc Content
---
Solidification Point
---
Colour
---
Physical State Data
liquid
Freezing Point
Not Established
Boiling Point
100 - 100 °C
Evaporation Rate
Slower Than n-Butyl Acetate
Physical State
liquid
Vapor Pressure
Not Established
Metal Corrosion
---
Softening Point
---
Density
1.82 - 2.28 g/cm3
Melting Point
---
Ph
Between 7.0 and 12.0
Kinematic Viscosity
---
Vapor Density
Heavier Than Air
Solubility In Water
Not Established
Flash Point
Seta Closed Cup: 100 °C
Flammability
Non-Flammable
Appearance
White to Off-White
Lower Explosive Limit
N.E.
Molecular Weight
---
Crystallisation Point
---
Partition Coefficient
Not Established
Form
---
Explosive Limits
---
Odor
Slight
Relative Evaporation Rate
---
Solubility In Fat
---
Relative Density
---
Properties Status
---
Bulk Density
---
Decomposition Temperature
Not Established
Dynamic Viscosity
Not Established
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Avoid

Do not breathe dust. Avoid dust formation in confined areas. Excessive heat and freezing.

Incompatible

strong bases and oxidizing agents

Decomposition

Above 1450 degree C: SO2 and CaO.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Presto Patch Multi-Purpose Ready Mix?

The signal word is danger.

What is the physical form of Presto Patch Multi-Purpose Ready Mix?

Presto Patch Multi-Purpose Ready Mix is a liquid appearing as white to off-white . It has slight odor.

What is Presto Patch Multi-Purpose Ready Mix used for?

Spackling Compound

What are the hazard statements for Presto Patch Multi-Purpose Ready Mix?

This substance has 3 hazard statements:

  • H350: May cause cancer.
  • H371: May cause damage to organs.
  • H373: May cause damage to organs through prolonged or repeated exposure.