Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Weldwood Instant Adhesive
- Product Code
- 070798001312
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200 Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Emergency Contact
1-800-535-5053
Emergency Contact
1-352-323-3500
Emergency Contact
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl cyanoacrylate | 7085-85-0 | 65 - 85% | Yes |
| Methyl methacrylate polymer | --- | 7 - 13% | No |
| Dimethyl sebacate | 106-79-6 | 3 - 7% | Yes |
| Fumed silica | 68909-20-6 | 0.5 - 1.5% | No |
The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.
First Aid Measures
Emergency procedures for chemical exposure incidents
If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.
Do not pull bonded skin apart. Soak in warm soapy water. Gently peel apart using a blunt object such as a spoon.
If the eye is bonded shut, apply warm water with a wet pad to release the eyelashes. Keep eye covered until debonding is complete. Do not force the eye open. Seek medical attention.
Symptoms: Adhesive will bond to eye protein and will cause the eye to periodically shed tears. Solid particles of cyanoacrylate may be trapped behind the eyelids and cause abrasive damage.
Make sure airways are clear.
Symptoms: Adhesive will immediately polymerize in mouth and will be impossible to swallow. Saliva will slowly separate the adhesive from mouth.
Immediate Medical Attention
Get medical attention immediately if continued difficulty in breathing is experienced. Seek medical attention for eye contact.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog
Vapor from this material will readily ignite at temperatures above 150 degrees F if an ignition source is present. Vapors may form an explosive mixture with air at temperatures above 150 degrees F. Eliminate sources of ignition: heat, electrical equipment, sparks and flames.
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Immediately eliminate sources of ignition. Contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations. Dike to prevent entering any sewer or waterway. Transfer liquid to a holding container. Read all product instructions before using. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Use absorbent material or scrape up dried material and place in container.
Dike to prevent entering any sewer or waterway.
Remove with inert absorbent. Use absorbent material or scrape up dried material and place in container.
Materials: inert absorbent
Related Products
Similar products with comparable safety profiles
Weldwood Original Spray Adhesive
---
Weldwood Multi Purpose Spray Adhesive
---
Weldwood Multi-Purpose Floor Adhesive
---
Weldwood Floor Tile Adhesive
---
Weldwood FRP Adhesive
---
Weldwood Original Wood Glue
---
Weldwood Original Contact Cement
---
Weldwood Landau Top & Trim Spray Adhesive
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Keep away from open flames, hot surfaces and sources of ignition. Provide adequate ventilation. Wear appropriate personal protection. Avoid contact with eyes, skin and clothing.
Store away from sources of ignition and heat. Do not store at temperatures above 120 °F (49 °C). Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Avoid contact with eyes, skin and clothing.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
exothermic reactions
Protect from water. Keep away from open flames, hot surfaces and sources of ignition. Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.
Water, alcohols, bases, cotton, wool, cellulosic materials Open flames, hot surfaces and sources of ignition. Keep away from strong oxidizing agents, heat and open flames. Strong bases.
Carbon monoxide, carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA1993
- Shipping Name
- Combustible liquid, n.o.s.
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Weldwood Instant Adhesive?
The signal word is warning.
What is the physical form of Weldwood Instant Adhesive?
Weldwood Instant Adhesive is a liquid appearing as clear . It has sharp odor.
What is Weldwood Instant Adhesive used for?
Adhesive
What are the hazard statements for Weldwood Instant Adhesive?
This substance has 4 hazard statements:
- H227: Combustible liquid
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.