NextSDS Logo
Safety Data Sheet EN

Weldwood Original Contact Cement

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Weldwood Original Contact Cement
Product Code
070798002715, 070798002722, 070798002739

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Adhesive

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200 Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535-5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Carc. Cat. 1B
Eye Irrit. Cat. 2A
Flam. Liq. Cat. 2
Repr. Cat. 2
Skin Irrit. Cat. 2
STOT RE Cat. 1
STOT SE Cat. 3
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapour.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H350 May cause cancer.
H361 Suspected of damaging fertility or the unborn child.
H372 Causes damage to organs through prolonged or repeated exposure.

Precautionary Statements

P102 Keep out of reach of children.
P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/../ equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P262 Do not get in eyes, on skin, or on clothing.
P264 Wash thoroughly after handling.
P270 Do no eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.
P370 + P378 In case of fire: Use... to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Toluene 108-88-3 30 - 60% Yes
Distillates (petroleum), light distillate hydrotreating process, low-boiling 68410-97-9 10 - 30% Yes
Polychlorinated Rubber 9010-98-4 7 - 13% No
Methyl ethyl ketone (MEK) 78-93-3 7 - 13% Yes
Heat reactive phenolic resin 25085-50-1 1 - 5% No
Petroleum hydrocarbon resin 64742-16-1 1 - 5% Yes
Magnesium oxide 1309-48-4 0.5 - 1.5% Yes
Talc (non-asbestiform) 14807-96-6 0.1 - 1% Yes

The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately. NOTE: Only trained personnel should administer artificial respiration or give oxygen.

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing. The use of vegetable oil or mineral oil is recommended for removal of this material from the skin. Flush exposed area with water while removing contaminated clothing. To remove from skin, remove completely with a dry cloth or paper towel, before washing with detergent and water.

Symptoms: irritation

Eye contact

If material gets into eyes, flush with water immediately for 15 minutes. Consult a physician.

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately for inhalation, ingestion, and if skin irritation persists.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.

Instructions

Use water spray to cool exposed surfaces. Cool fire-exposed containers using water spray.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Review fire hazards before proceeding with clean up. Keep people away from and upwind of spill/leak. Read all product instructions before using.

Environmental

No Information

Cleanup methods

Soak up with inert absorbent material. Scrape up dried material and place into containers.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Provide adequate ventilation. Keep containers closed when not in use. Avoid heat, sparks and open flames. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Use in well ventilated area. Open all windows and doors or use other means to ensure cross-ventilation and fresh air entry during application and drying. Odor is not an adequate warning for hazardous conditions. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion. Wash thoroughly after handling. Do not use in areas where static sparks may be generated. Do not let product enter drains. Intentional misuse by deliberately concentrating and inhaling vapors may be harmful or fatal. Construction and repair activities can adversely affect indoor air quality. Consult with occupants or a representative (i.e. maintenance, building manager, industrial hygienist, or safety officer) to determine ways to minimize impact.

Storage

Store away from sources of ignition and heat. Do not store at temperatures above 120 °F (49 °C). Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.

Hygiene

Wash thoroughly after handling.

Fire prevention

Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames. Do not use in areas where static sparks may be generated.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Thick Liquid
Colour
Tan
Colour Intensity
---
Form
---
Odor
Strong Solvent
Odor Threshold
Not Established
Ph
Not Applicable
Melting Point
---
Boiling Point
76.7 - 82.2 °C
Flash Point
Pensky-Martens Closed Cup: -6 °C
Freezing Point
Not Established
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not Established
Vapor Pressure
Not Established
Vapor Density
Not Established
Relative Density
---
Bulk Density
---
Density
0.88 g/cm3
Flammability
---
Upper Explosive Limit
N.E.
Lower Explosive Limit
N.E.
Explosive Limits
---
Auto Ignition Temperature
Not Established
Decomposition Temperature
Not Established
Solubility
---
Partition Coefficient
Not Established
Solubility In Water
Not Established
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not Established
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Hazardous reactions

Exothermic reaction with strong acids.

Avoid

Keep away from open flames, hot surfaces and sources of ignition. Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions. Avoid contact with skin, eyes and clothing. Do not smoke.

Incompatible

Open flames, hot surfaces, sources of ignition, strong oxidizing agents, heat, strong acids, alkali metals and alkaline earth metals.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1133
Shipping Name
Adhesives, containing a flammable liquid
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Weldwood Original Contact Cement?

The signal word is danger.

What is the physical form of Weldwood Original Contact Cement?

Weldwood Original Contact Cement is a liquid appearing as thick liquid with tan color. It has strong solvent odor.

What is Weldwood Original Contact Cement used for?

Adhesive

What are the hazard statements for Weldwood Original Contact Cement?

This substance has 9 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H332: Harmful if inhaled.
  • H335: May cause respiratory irritation.
  • H336: May cause drowsiness or dizziness.
  • H350: May cause cancer.
  • H361: Suspected of damaging fertility or the unborn child.
  • H372: Causes damage to organs through prolonged or repeated exposure.