Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Touch N Foam Professional Wall & Cavity HFO Foam Sealant
- Product Code
- 075650003510, 075650003527, 075650003534
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Foam Sealant/Adhesive
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200 Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Medical/Poison Control
1-800-222-1222
Transportation/National Response Center
1-800-535-5053
Transportation/National Response Center
1-352-323-3500
Transportation
1-800-535-5053
Emergency Contact
1-352-323-3500
Poison Control
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS04
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polymeric diphenylmethane diisocyanate | 9016-87-9 | 15 - 40% | Yes |
| Tris(2-chloro-1-methylethyl) phosphate | 13674-84-5 | 10 - 30% | Yes |
| Trans-1,3,3,3-Tetrafluoroprop-1-ene | 29118-24-9 | 10 - 30% | No |
| 4,4'-Methylene diphenyl diisocyanate (MDI) | 101-68-8 | 10 - 30% | Yes |
| 2-Butyne-1,4-diol, polymer with (chloromethyl) oxirane, brominated, dehydrochlorinated, methoxylated | 68441-62-3 | 7 - 13% | Yes |
| (1-Propane, 1-Chloro-3,3,3-trifluoro-, (1E)) | 102687-65-0 | 1 - 5% | No |
| Paraffin and hydrocarbon Waxes | 63449-39-8 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.
Symptoms: difficulty in breathing
Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Use a rag to remove excess foam from skin and remove contaminated clothing. Use of a solvent, such as acetone (nail polish remover) or mineral spirits, may help in removing uncured foam residue from clothing or other surfaces (avoid eye contact). Cured foam may be physically removed by persistent washing with soap and water. If irritation develops, use mild skin cream. If irritation persists, obtain medical attention.
Symptoms: irritation
In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.
Symptoms: irritation
If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately for inhalation, ingestion, eye contact, and persistent skin irritation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Water Spray or Fog, Water
Closed containers may burst if exposed to extreme heat or fire. Containers may explode if exposed to extreme heat.
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain spilled material and remove with inert absorbent. Scrape up dried material and place into containers. Uncured product is very sticky, so carefully remove the bulk of the foam by scraping it up and then immediately remove residue with a rag and solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner, etc. Once the product has cured, it can only be removed physically by scraping, buffing, etc.
No Information
remove with inert absorbent. Scrape up dried material. Remove residue with a rag and solvent. Once cured, remove physically by scraping, buffing, etc.
Materials: inert absorbent, rag, solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner
Related Products
Similar products with comparable safety profiles
Touch N Foam Professional Window & Door PU Foam Sealant
---
Touch N Foam All-Purpose PU Foam Sealant
---
Touch N Foam Home Seal Minimum Expanding Sealant
---
Touch N Foam No Warp Window & Door Foam Sealant
---
Touch N Foam Professional Quick Cure Reduced Expansion Low GWP PU Foam Sealant
---
Touch N Seal One-Component All-Season Foam Sealant
---
Touch N Seal Gun Foam Sealant Black
---
Touch N Foam Max Fill Triple Expanding Sealant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Make sure nozzle is directed away from yourself prior to discharge. Keep away from open flames, hot surfaces and sources of ignition. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling. Contains isocyanates. Persons allergic to isocyanates, and particularly those suffering from asthma or other respiratory conditions, should not work with isocyanates.
Protect material from direct sunlight. Keep containers tightly closed in a dry, cool and well-ventilated place. Store containers away from excessive heat and freezing.
Wash thoroughly after handling.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Excessive heat and freezing.
strong bases and oxidizing agents.
Normal decomposition products, i.e., COx, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3500
- Shipping Name
- Chemical under pressure, n.o.s.
- Transport Class
- 2.2 Non-flamm compressed gas
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Touch N Foam Professional Wall & Cavity HFO Foam Sealant?
The signal word is warning.
What is the physical form of Touch N Foam Professional Wall & Cavity HFO Foam Sealant?
Touch N Foam Professional Wall & Cavity HFO Foam Sealant is a foam appearing as cream . It has slight odor.
What is Touch N Foam Professional Wall & Cavity HFO Foam Sealant used for?
Foam Sealant/Adhesive
What are the hazard statements for Touch N Foam Professional Wall & Cavity HFO Foam Sealant?
This substance has 3 hazard statements:
- H280: Contains gas under pressure; may explode if heated.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.