Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ready-To-Use Concrete Patch
- Product Code
- 7970701
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Spackling Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200, Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Transportation
1-800-535-5053
Transportation
1-352-323-3500
Poison Control
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Respirable crystalline silica | 14808-60-7 | 15 - 40% | Yes |
| Limestone | 1317-65-3 | 10 - 30% | Yes |
| Perlite | 93763-70-3 | 3 - 7% | Yes |
| Clay | 1332-58-7 | 1 - 5% | Yes |
| Fly ash | 68131-74-8 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Leave the area to obtain fresh air.
Symptoms: Difficulty in breathing
Wash skin with soap and water for 15 minutes.
Immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.
Symptoms: Irritation
If swallowed, do not induce vomiting.
Immediate Medical Attention
Get medical attention immediately if continued difficulty is experienced, if symptoms persist, or if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
No Information
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No Information
Related Products
Similar products with comparable safety profiles
Phenopatch Pre-Mixed Concrete Patch
---
Stucco Patch Ready to Use
---
Concrete Patcher & Resurfacer Dry Mix
---
Concrete Patcher & Resurfacer Dry Mix
---
Patching Plaster Ready To Use
---
Presto Patch Multi-Purpose Ready Mix
---
Dry Concrete Crack Filler
---
Presto Patch Multi-Purpose Patching Compound Dry Mix
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Do not breathe dust. Removal of this product after use will result in the generation of Dust. If dry-sanded, exposure to dust may result in the build-up of material in eyes, ears, nose, and mouth which may cause irritation. While dry sanding, use of a NIOSH-approved dust mask is recommended. Wash thoroughly after handling.
Avoid excessive heat and freezing. Do not store at temperatures above 120 °F (49 °C). Store away from caustics and oxidizers. Keep containers tightly closed.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Do not breathe dust. Avoid dust formation in confined areas. Excessive heat and freezing.
Incompatible with strong bases and oxidizing agents.
Above 1450 degree C: SO2 and CaO.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ready-To-Use Concrete Patch?
The signal word is danger.
What is the physical form of Ready-To-Use Concrete Patch?
Ready-To-Use Concrete Patch is a solid appearing as paste with gray color. It has musty odor.
What is Ready-To-Use Concrete Patch used for?
Spackling Compound
What are the hazard statements for Ready-To-Use Concrete Patch?
This substance has 6 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H350: May cause cancer.
- H370: Causes damage to organs. Classified Category 1 Substances that produced significant toxicity in humans and evidence to produce significant toxicity with single exposure. Cell death, adverse change in biochemistry, haematology or urinalysis parameters, Central or peripheral nervous system and effects senses. multifocal or diffuse necrosis, fibrosis or granuloma formation in organs.
- H372: Causes damage to organs through prolonged or repeated exposure.