Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DAP Ceiling Spray Texture Popcorn 16 oz
- Product Code
- 070798500355
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Spackling Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200, Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Emergency Contact
1-800-535-5053
Emergency Contact
1-352-323-3500
Emergency Contact
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 10 - 30% | Yes |
| Dimethyl ether | 115-10-6 | 10 - 30% | No |
| Calcium Carbonate | 471-34-1 | 7 - 13% | Yes |
| Clay | 1332-58-7 | 3 - 7% | Yes |
| Texanol | 25265-77-4 | 1 - 5% | Yes |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
| Respirable crystalline silica | 14808-60-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If you experience difficulty in breathing, leave the area to obtain fresh air.
Wash skin with soap and water for 15 minutes.
In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.
If swallowed, DO NOT INDUCE VOMITING.
Immediate Medical Attention
If continued difficulty is experienced (inhalation), get medical attention immediately. Get medical aid if symptoms persist (skin). Get medical attention immediately (eye). Get medical attention immediately (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Review fire hazards before proceeding with clean up. Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Prevent product from entering drains. Soak up with inert absorbent material and dispose of as hazardous waste. Read all product instructions before using. Scrape up dried material and place into containers.
Prevent product from entering drains.
Soak up with inert absorbent material and dispose of as hazardous waste. Scrape up dried material and place into containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Knock Down Water Based Spray Texture
---
DAP Wall & Cavity Foam 20 oz
---
Orange Peel Water Based Spray Texture
---
Orange Peel Solvent Based Spray Texture
---
DAP® SOUND BLOCK™ Acoustical Sound & Draft Sealant
---
DAP Foamboard Construction Adhesive
---
DAP All Purpose Construction Adhesive
---
SPRAY PAINT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Make sure nozzle is directed away from yourself prior to discharge. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Do not breathe dust. Removal of this product after use will result in the generation of Dust. If dry-sanded, exposure to dust may result in the build-up of material in eyes, ears, nose, and mouth which may cause irritation. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion. Wash thoroughly after handling.
Store away from sources of ignition and heat. Keep away from heat and sources of ignition. Avoid excessive heat and freezing. Protect material from direct sunlight. Do not store at temperatures above 120 °F (49 °C). Store away from caustics and oxidizers. Keep containers tightly closed.
Wash thoroughly after handling.
Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.
Do not burn or use a cutting torch on the empty container. Excessive heat or flames, incompatible substances. Excessive heat and freezing. Keep away from open flames, hot surfaces and sources of ignition.
Open flames, hot surfaces and sources of ignition. Incompatible with strong bases and oxidizing agents.
Above 1450 degree C: SO2 and CaO.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- Aerosols, flammable
- Transport Class
- 2.1 Flammable gas
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DAP Ceiling Spray Texture Popcorn 16 oz?
The signal word is danger.
What is the physical form of DAP Ceiling Spray Texture Popcorn 16 oz?
DAP Ceiling Spray Texture Popcorn 16 oz is a aerosol appearing as aerosol with white color. It has slight odor.
What is DAP Ceiling Spray Texture Popcorn 16 oz used for?
Spackling Compound
What are the hazard statements for DAP Ceiling Spray Texture Popcorn 16 oz?
This substance has 6 hazard statements:
- H222: Extremely flammable aerosol.
- H280: Contains gas under pressure; may explode if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H350: May cause cancer.
- H373: May cause damage to organs through prolonged or repeated exposure.