NextSDS Logo
Safety Data Sheet EN

Orange Peel Water Based Spray Texture

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Orange Peel Water Based Spray Texture
Product Code
070798500051, 070798500150

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Spray Textures

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200 Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Emergency Contact

1-800-535-5053

Emergency Contact

1-352-323-3500

Emergency Contact

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1A
Eye Irrit. Cat. 2A
Aerosol Cat. 1
Gas under Pressure, Comp. Gas
Skin Irrit. Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

GHS04 - Compressed gas

GHS04

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H222 Extremely flammable aerosol.
H280 Contains gas under pressure; may explode if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H350 May cause cancer.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P264 Wash thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.
P405 Store locked up.
P410 + P403 Protect from sunlight. Store in a well-ventilated place.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
Dimethyl ether 115-10-6 10 - 30% No
Calcium Carbonate 471-34-1 5 - 10% Yes
Titanium dioxide 13463-67-7 0.1 - 1% Yes
Respirable crystalline silica 14808-60-7 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist.

Eye contact

In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

Containers may explode if exposed to extreme heat.

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Review fire hazards before proceeding with clean up. Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Prevent product from entering drains. Soak up with inert absorbent material and dispose of as hazardous waste. Read all product instructions before using. Scrape up dried material and place into containers.

Environmental

No Information

Cleanup methods

Soak up with inert absorbent material, Scrape up dried material

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Make sure nozzle is directed away from yourself prior to discharge. Wear appropriate personal protection. Do not breathe dust.

Storage

Avoid excessive heat and freezing.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat and sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor Threshold
Not Established
Solubility In Water
Not Established
Relative Density
---
Physical State
Aerosol
Freezing Point
Not Established
Colour
Orange
Appearance
Aerosol
Density
1.39 g/cm3
Dynamic Viscosity
Not Aplicable
Explosive Limits
---
Auto Ignition Temperature
Not Established
Vapor Density
Heavier Than Air
Kinematic Viscosity
---
Evaporation Rate
Faster Than n-Butyl Acetate
Decomposition Temperature
Not Established
Softening Point
---
Cloud Point
---
Voc Content
---
Properties Status
---
Solubility In Fat
---
Metal Corrosion
---
Solidification Point
---
Boiling Point
N.A. Aerosol, foam.
Upper Explosive Limit
N.E.
Melting Point
---
Lower Explosive Limit
N.E.
Flammability
---
Solubility
---
Molecular Weight
---
Partition Coefficient
Not Established
Bulk Density
---
Colour Intensity
---
Relative Evaporation Rate
---
Ph
Between 7.0 and 12.0
Flash Point
Aerosol or foam, not applicable.
State Under Standard Conditions
---
Odor
Slight
Crystallisation Point
---
Physical State Data
aerosol
Form
---
Vapor Pressure
Not Established
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Avoid

Do not burn or use a cutting torch on the empty container. Excessive heat or flames, incompatible substances. Excessive heat and freezing.

Incompatible

strong bases and oxidizing agents

Decomposition

Above 1450 degree C: SO2 and CaO.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols, flammable
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Orange Peel Water Based Spray Texture?

The signal word is danger.

What is the physical form of Orange Peel Water Based Spray Texture?

Orange Peel Water Based Spray Texture is a aerosol appearing as aerosol with orange color. It has slight odor.

What is Orange Peel Water Based Spray Texture used for?

Spray Textures

What are the hazard statements for Orange Peel Water Based Spray Texture?

This substance has 5 hazard statements:

  • H222: Extremely flammable aerosol.
  • H280: Contains gas under pressure; may explode if heated.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H350: May cause cancer.