NextSDS Logo
Safety Data Sheet EN

Dynaflex 800 Advanced All Weather Window, Door and Siding Sealant Crystal Clear

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Dynaflex 800 Advanced All Weather Window, Door and Siding Sealant Crystal Clear
Product Code
070798808508

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Caulking Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200 Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535 -5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P362 Take off contaminated clothing.
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
1,2-Benzenedicarboxylic acid, di-C9-C11-branched 68515-49-1 15 - 40% Yes
Cyclotetrasiloxane, octamethyl-, reaction prods. with silica 68583-49-3 5 - 10% Yes
Trimethoxyvinylsilane 2768-02-7 1 - 5% Yes
Diisononyl phthalate (DINP) 68515-48-0 1 - 5% Yes
Organosilane Ester --- 0.5 - 1.5% Yes

The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

Symptoms: difficulty in breathing

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist.

Eye contact

Immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.

Symptoms: irritation

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Scrape up dried material and place into containers.

Environmental

No Information

Cleanup methods

Scrape up dried material and place into containers.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling. Remove contact lenses before using. Do not handle contact lenses until all sealant has been cleaned from fingertips, nails and cuticles. Residual sealant may transfer to contact lenses and cause severe eye irritation.

Storage

Avoid excessive heat and freezing. Do not store at temperatures above 120 °F (49 °C). Store away from caustics and oxidizers.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
Slight
Solidification Point
---
Boiling Point
N.A. Mixture w/o a constant boiling point.
Density
1.03 g/cm3
Physical State Data
solid
Lower Explosive Limit
N.E.
Appearance
Paste
Dynamic Viscosity
Not Established
Relative Density
---
Evaporation Rate
Slower Than n-Butyl Acetate
Flash Point
Water - based, does not flash.
Crystallisation Point
---
Bulk Density
---
Odor Threshold
Not Established
Colour Intensity
---
Partition Coefficient
Not Established
Colour
Clear
Metal Corrosion
---
Molecular Weight
---
Softening Point
---
Vapor Density
Heavier Than Air
Vapor Pressure
Not Established
Solubility In Fat
---
Physical State
Solid
Solubility
---
Upper Explosive Limit
N.E.
Freezing Point
Not Established
Explosive Limits
---
State Under Standard Conditions
---
Flammability
---
Solubility In Water
Not Established
Auto Ignition Temperature
Not Established
Cloud Point
---
Melting Point
---
Kinematic Viscosity
---
Voc Content
---
Properties Status
---
Decomposition Temperature
Not Established
Ph
Not Applicable
Relative Evaporation Rate
---
Form
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Avoid

Excessive heat and freezing.

Incompatible

strong bases and oxidizing agents.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Dynaflex 800 Advanced All Weather Window, Door and Siding Sealant Crystal Clear?

The signal word is warning.

What is the physical form of Dynaflex 800 Advanced All Weather Window, Door and Siding Sealant Crystal Clear?

Dynaflex 800 Advanced All Weather Window, Door and Siding Sealant Crystal Clear is a solid appearing as paste with clear color. It has slight odor.

What is Dynaflex 800 Advanced All Weather Window, Door and Siding Sealant Crystal Clear used for?

Caulking Compound

What are the hazard statements for Dynaflex 800 Advanced All Weather Window, Door and Siding Sealant Crystal Clear?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.