NextSDS Logo
Safety Data Sheet EN

WDS Dynaflex 920 Premium Exterior Elastomeric Sealant Clear

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WDS Dynaflex 920 Premium Exterior Elastomeric Sealant Clear
Product Code
070798892026

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Caulking Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200 Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535-5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P321 Specific treatment (see ... on this label).
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
1,2-Benzenedicarboxylic acid, di-C9-C11-branched 68515-49-1 10 - 30% Yes
3-(trimethoxysilyl)propylamine 13822-56-5 1 - 5% No
Organosilane Ester 2768-02-7 1 - 5% Yes
Diisononyl phthalate (DINP) 68515-48-0 0.5 - 1.5% Yes
Silica, amorphous 7631-86-9 0.5 - 1.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist.

Eye contact

In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment as necessary. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Scrape up dried material and place into containers.

Environmental

No Information

Cleanup methods

Scrape up dried material and place into containers.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling.

Storage

Avoid excessive heat and freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Evaporation Rate
---
Boiling Point
100 - 100 °C
Vapor Density
Heavier Than Air
Physical State
Paste
Flammability
Non-Flammable
Dynamic Viscosity
Not Established
Kinematic Viscosity
---
Relative Density
---
Colour
---
Partition Coefficient
Not Established
Physical State Data
liquid
Explosive Limits
---
Appearance
Clear
Softening Point
---
Solidification Point
---
Density
1.03 - 1.03 g/cm3
Voc Content
---
Melting Point
---
Vapor Pressure
Not Established
Odor
Slight
Form
---
Freezing Point
Not Established
Decomposition Temperature
Not Established
Evaporation Rate
Slower Than n-Butyl Acetate
Auto Ignition Temperature
Not Established
Flash Point
100 °C (Seta Closed Cup)
Lower Explosive Limit
N.E.
Metal Corrosion
---
Solubility In Fat
---
Crystallisation Point
---
Solubility
---
State Under Standard Conditions
---
Odor Threshold
Not Established
Ph
Not Applicable
Upper Explosive Limit
N.E.
Properties Status
---
Bulk Density
---
Colour Intensity
---
Cloud Point
---
Molecular Weight
---
Solubility In Water
Not Established
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Avoid

Excessive heat and freezing.

Incompatible

strong bases and oxidizing agents.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WDS Dynaflex 920 Premium Exterior Elastomeric Sealant Clear?

The signal word is warning.

What is the physical form of WDS Dynaflex 920 Premium Exterior Elastomeric Sealant Clear?

WDS Dynaflex 920 Premium Exterior Elastomeric Sealant Clear is a paste appearing as clear . It has slight odor.

What is WDS Dynaflex 920 Premium Exterior Elastomeric Sealant Clear used for?

Caulking Compound

What are the hazard statements for WDS Dynaflex 920 Premium Exterior Elastomeric Sealant Clear?

This substance has 1 hazard statement:

  • H317: May cause an allergic skin reaction.