NextSDS Logo
Safety Data Sheet EN

DAP Ultra Clear Flexible Waterproof Sealant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DAP Ultra Clear Flexible Waterproof Sealant
Product Code
070798183889

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Caulking Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200, Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Emergency Contact

1-800-535-5053

Emergency Contact

1-352-323-3500

Emergency Contact

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4
Flam. Liq. Cat. 3
Skin Irrit. Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H332 Harmful if inhaled.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/../ equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see _ on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P362 Take off contaminated clothing.
P370 + P378 In case of fire: Use.. to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hydrogenated petroleum resin 69430-35-9 15 - 40% No
Xylenes 1330-20-7 10 - 30% Yes
Ethyl benzene 100-41-4 5 - 10% Yes
Bis(1,2,2,6,6-pentamethyl).seb 41556-26-7 1 - 5% No
Methyl(1,2,2,6,6-penta...):seb 82919-37-7 0.5 - 1.5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If breathing is difficult, leave the area to obtain fresh air. If continued breathing difficulty is experienced, get medical attention immediately. NOTE: Only trained personnel should administer artificial respiration or give oxygen.

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing.

Eye contact

If material gets into eyes, flush with water immediately for 15 minutes. Consult a physician.

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately if continued breathing difficulty is experienced or if swallowed. Consult a physician for eye contact. Get medical aid if symptoms persist for skin contact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

Eliminate sources of ignition: heat, electrical equipment, sparks and flames. Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Review fire hazards before proceeding with clean up. Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Prevent product from entering drains. Soak up with inert absorbent material and dispose of as hazardous waste. Read all product instructions before using. Scrape up dried material and place into containers.

Environmental

No Information

Cleanup methods

Soak up with inert absorbent material and dispose of as hazardous waste. Scrape up dried material and place into containers.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling. Do not use in areas where static sparks may be generated.

Storage

Store away from sources of ignition and heat. Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.

Hygiene

Wash thoroughly after handling.

Fire prevention

Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames. Do not use in areas where static sparks may be generated.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Paste
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Clear
Colour
---
Colour Intensity
---
Form
---
Odor
Strong Solvent
Odor Threshold
Not Established
Ph
Not Applicable
Melting Point
---
Boiling Point
N.A. - N.A.
Flash Point
Pensky-Martens Closed Cup 27.2 °C
Freezing Point
Not Established
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not Established
Vapor Pressure
Not Established
Vapor Density
Heavier Than Air
Relative Density
---
Bulk Density
---
Density
0.89 - 0.89 g/cm3
Flammability
Flammable Liquid Class IC
Upper Explosive Limit
N.E.
Lower Explosive Limit
N.E.
Explosive Limits
---
Auto Ignition Temperature
Not Established
Decomposition Temperature
Not Established
Solubility
---
Partition Coefficient
Not Established
Solubility In Water
Not Established
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not Established
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Avoid

Keep away from open flames, hot surfaces and sources of ignition. Do not smoke.

Incompatible

oxidizing agents, strongly alkaline and strongly acid materials, strong oxidizing agents, strong acids and strong bases.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1133
Shipping Name
Adhesives, containing a flammable liquid
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DAP Ultra Clear Flexible Waterproof Sealant?

The signal word is warning.

What is the physical form of DAP Ultra Clear Flexible Waterproof Sealant?

DAP Ultra Clear Flexible Waterproof Sealant is a paste appearing as clear . It has strong solvent odor.

What is DAP Ultra Clear Flexible Waterproof Sealant used for?

Caulking Compound

What are the hazard statements for DAP Ultra Clear Flexible Waterproof Sealant?

This substance has 3 hazard statements:

  • H226: Flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H332: Harmful if inhaled.