NextSDS Logo
Safety Data Sheet EN

DAP 3.0 Gutter & Flashing Sealant Crystal Clear

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DAP 3.0 Gutter & Flashing Sealant Crystal Clear
Product Code
070798183773, 070798007659

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Caulking Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200 Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535-5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H335 EMERGENCY OVERVIEW: Under normal use conditions, this product is not expected to cause adverse health effects. High concentration of vapors may cause irritation to eyes and respiratory system.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
1,2-Benzenedicarboxylic acid, di-C9-C11-branched 68515-49-1 15 - 40% Yes
Cyclotetrasiloxane, octamethyl-, reaction prods. with silica 68583-49-3 5 - 10% Yes
Trimethoxyvinylsilane 2768-02-7 1 - 5% Yes
Diisononyl phthalate (DINP) 68515-48-0 1 - 5% Yes
3-(trimethoxysilyl)propylamine 13822-56-5 1 - 5% No

Notes

The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

Symptoms: difficulty in breathing

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist.

Eye contact

Immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.

Symptoms: irritation

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog

Specific hazards

No special protective measures against fire required.

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

No Information

Cleanup methods

Scrape up dried material and place into containers.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling. Remove contact lenses before using. Do not handle contact lenses until all sealant has been cleaned from fingertips, nails and cuticles. Residual sealant may transfer to contact lenses and cause severe eye irritation.

Storage

Avoid excessive heat and freezing. Store away from caustics and oxidizers.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
Heavier Than Air
Freezing Point
Not Established
Physical State Data
solid
Cloud Point
---
Relative Density
---
Colour
Clear
Form
---
Properties Status
---
Voc Content
---
Physical State
Solid
Solidification Point
---
Solubility In Fat
---
Partition Coefficient
Not Established
Solubility
---
Molecular Weight
---
Dynamic Viscosity
Not Established
Upper Explosive Limit
N.E.
Colour Intensity
---
Explosive Limits
---
Density
1.03 g/cm3
Odor Threshold
Not Established
Boiling Point
N.A. Mixture w/o a constant boiling point.
Odor
Slight
Appearance
Paste
Metal Corrosion
---
Decomposition Temperature
Not Established
Relative Evaporation Rate
---
Flammability
---
Bulk Density
---
Crystallisation Point
---
Softening Point
---
Kinematic Viscosity
---
State Under Standard Conditions
---
Auto Ignition Temperature
Not Established
Evaporation Rate
Slower Than n-Butyl Acetate
Lower Explosive Limit
N.E.
Vapor Pressure
Not Established
Solubility In Water
Not Established
Ph
Not Applicable
Melting Point
---
Flash Point
Water - based, does not flash.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Avoid

Excessive heat and freezing.

Incompatible

Incompatible with strong bases and oxidizing agents.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not Regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DAP 3.0 Gutter & Flashing Sealant Crystal Clear?

The signal word is no signal word.

What is the physical form of DAP 3.0 Gutter & Flashing Sealant Crystal Clear?

DAP 3.0 Gutter & Flashing Sealant Crystal Clear is a solid appearing as paste with clear color. It has slight odor.

What is DAP 3.0 Gutter & Flashing Sealant Crystal Clear used for?

Caulking Compound

What are the hazard statements for DAP 3.0 Gutter & Flashing Sealant Crystal Clear?

This substance has 1 hazard statement:

  • H335: EMERGENCY OVERVIEW: Under normal use conditions, this product is not expected to cause adverse health effects. High concentration of vapors may cause irritation to eyes and respiratory system.