NextSDS Logo
Safety Data Sheet EN

Gorilla Sealant Clear (100% Silicone Sealant)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Gorilla Sealant Clear (100% Silicone Sealant)
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Sealant

Manufacturers & Suppliers

The Gorilla Glue Company logo

The Gorilla Glue Company

manufacturer

2101 E. Kemper Road, Cincinnati, Ohio 45241

513-271-3300

www.gorillatough.com

Emergency Contacts

Emergency Contact

(800) 966-3458

DURING BUSINESS HOURS

Emergency Contact

(800) 420-7186

OUTSIDE BUSINESS HOURS

Prosar

1-800-420-7186

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P102 Keep out of reach of children.
P280 Wear protective gloves, protective clothing, and eye protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Silica, amorphous 7631-86-9 7 - 13% Yes
Distillates, petroleum, hydrotreated middle 64742-46-7 7 - 13% Yes
Silanetriol, ethyl-, triacetate 17689-77-9 0.1 - 1% Yes
Silanetriol, methyl-, triacetate 4253-34-3 0.1 - 1% Yes
Acetic acid 64-19-7 0.1% Yes
Acetic anhydride 108-24-7 0.1% Yes
Benzene, 1-[(diiodomethyl)sulfonyl]-4-methyl- 20018-09-1 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

When symptoms occur: go into open air and ventilate suspected area. Obtain medical attention if breathing difficulty persists.

Skin contact

Remove contaminated clothing. Drench affected area with water for at least 15 minutes. Obtain medical attention if irritation develops or persists.

Eye contact

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Ingestion

Rinse mouth. Do NOT induce vomiting. Obtain medical attention.

Immediate Medical Attention

If exposed or concerned, get medical advice and attention. If medical advice is needed, have product container or label at hand.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, dry chemical, alcohol-resistant foam, carbon dioxide.

Unsuitable media

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Specific hazards

Not considered flammable but may burn at high temperatures. Product is not explosive. Reactivity: Hazardous reactions will not occur under normal conditions. High temperatures, water, oxidizers, and acids may cause a hazardous reaction. Hazardous reactions may occur on contact with certain chemicals.

Instructions

Use water spray or fog for cooling exposed containers. Do not breathe fumes from fires or vapors from decomposition.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Ventilate area. Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

Large spill

Take up large spills with pump or vacuum.

Environmental

Prevent entry to sewers and public waters. Avoid release to the environment.

Cleanup methods

Clean up spills immediately and dispose of waste safely. Absorb and/or contain spill with inert material. Take up large spills with pump or vacuum. Transfer spilled material to a suitable container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not handle until all safety precautions have been read and understood. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not breathe mist, spray, and vapors. Avoid contact with skin, eyes and clothing. Use appropriate personal protection equipment (PPE).

Storage

Keep container closed when not in use. Store in a dry, cool and well-ventilated place. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials. Containers which are opened should be properly resealed and kept upright to prevent leakage. Protect from moisture. Store locked up.

Hygiene

Handle in accordance with good industrial hygiene and safety procedures.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Paste
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Clear to slightly hazy, colorless.
Colour
Clear to slightly hazy, colorless.
Colour Intensity
---
Form
---
Odor
Acetic acid
Odor Threshold
Not available
Ph
Not available
Melting Point
Not available
Boiling Point
Not available
Flash Point
Not available
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available
Vapor Pressure
Not available
Vapor Density
---
Relative Density
1.007
Bulk Density
---
Density
---
Flammability
Not available
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Not available
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not available
Kinematic Viscosity
Not available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions (see section 7).

Reactivity

Hazardous reactions will not occur under normal conditions. High temperatures, water, oxidizers, and acids may cause a hazardous reaction. Hazardous reactions may occur on contact with certain chemicals. Refer to incompatible materials.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Direct sunlight, extremely high or low temperatures, and incompatible materials.

Incompatible

Strong acids, strong bases, strong oxidizers. Water. Alcohols. Alkalis. Peroxides. Amines.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Gorilla Sealant Clear (100% Silicone Sealant)?

The signal word is warning.

What is the physical form of Gorilla Sealant Clear (100% Silicone Sealant)?

Gorilla Sealant Clear (100% Silicone Sealant) is a paste appearing as clear to slightly hazy, colorless. with clear to slightly hazy, colorless. color. It has acetic acid odor.

What is the solubility of Gorilla Sealant Clear (100% Silicone Sealant)?

Not available

What is Gorilla Sealant Clear (100% Silicone Sealant) used for?

Sealant

What are the hazard statements for Gorilla Sealant Clear (100% Silicone Sealant)?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of Gorilla Sealant Clear (100% Silicone Sealant)?

The melting point is Not available and the boiling point is Not available.