NextSDS Logo
Safety Data Sheet EN

Gorilla Epoxy - Resin

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Gorilla Epoxy - Resin
Product Form
Mixture
Synonyms
Epoxy Resin

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Epoxy

Manufacturers & Suppliers

The Gorilla Glue Company logo

The Gorilla Glue Company

manufacturer

2101 E. Kemper Road, Cincinnati, Ohio 45241

513-271-3300

http://www.gorillatough.com

Emergency Contacts

Emergency Contact

(800) 966-3458

During Business Hours

Emergency Contact

(800) 420-7186

Outside Business Hours

Prosar

1-800-420-7186

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319
Skin Sens. Cat. 1 H317
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P261 Avoid breathing vapors, mist, or spray.
P264 Wash hands, forearms, and other exposed areas thoroughly after handling.
P272 Contaminated work clothing must not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing, and eye protection.
P302 + P352 If on skin: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P391 Collect spillage.
P501 Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Bisphenol A-epichlorohydrin polymer 25068-38-6 60% Yes
(3-(2,3-Epoxypropoxy)propyl)trimethoxysilane 2530-83-8 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical advice.

Symptoms: May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Skin contact

Remove contaminated clothing. Gently wash with plenty of soap and water followed by rinsing with water for at least 15 minutes. Call a POISON CENTER or doctor/physician if you feel unwell. Wash contaminated clothing before reuse.

Symptoms: Causes skin irritation. Exposure may produce an allergic reaction.

Eye contact

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Causes serious eye irritation.

Ingestion

Rinse mouth. Do not induce vomiting. Immediately call a POISON CENTER or doctor/physician.

Symptoms: Ingestion is likely to be harmful or have adverse effects.

Immediate Medical Attention

If medical advice is needed, have product container or label at hand.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing media appropriate for surrounding fire.

Unsuitable media

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Specific hazards

Fire Hazard: Not flammable. Explosion Hazard: Product is not explosive. Reactivity: None known.

Instructions

Exercise caution when fighting any chemical fire. Do not allow run-off from fire fighting to enter drains or water courses.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Clean up spills immediately and dispose of waste safely.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking, or smoking and again when leaving work.

Storage

Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Store away from incompatible materials.

Hygiene

Wash hands and other exposed areas with mild soap and water before eating, drinking, or smoking and again when leaving work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Provide sufficient ventilation to keep vapors below permissible exposure limit. Ensure all national/local regulations are observed.

Hands

Wear chemically resistant protective gloves.

Eyes

Chemical goggles or safety glasses.

Respiratory

Insufficient ventilation: wear respiratory protection. If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn.

Skin/Body

Protective clothing. Chemically resistant materials and fabrics. Wear suitable protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
1.1 – 1.2
Boiling Point
Not available
Density
---
Auto Ignition Temperature
Not available
Molecular Weight
---
Colour
---
Explosive Limits
---
Colour Intensity
---
Crystallisation Point
---
Vapor Density
---
Odor Threshold
Not available
Metal Corrosion
---
Solidification Point
---
Dynamic Viscosity
Not available
Form
---
Relative Evaporation Rate
---
Lower Explosive Limit
Not available
Vapor Pressure
Not available
Physical State Data
liquid
Properties Status
---
Evaporation Rate
Not available
Solubility In Water
---
Ph
Not applicable
Solubility
Not available
Partition Coefficient
Not available
Bulk Density
---
Flammability
Not available
Decomposition Temperature
Not available
Solubility In Fat
---
State Under Standard Conditions
---
Upper Explosive Limit
Not available
Voc Content
---
Cloud Point
---
Odor
Not available
Freezing Point
Not available
Kinematic Viscosity
Not available
Physical State
Liquid
Softening Point
---
Melting Point
Not available
Flash Point
> 93 °C Closed Cup (199.40 °F)
Appearance
Translucent, Clear
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions (see section 7).

Reactivity

None known.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Direct sunlight. Extremely high or low temperatures.

Incompatible

Strong acids, strong bases, strong oxidizers.

Decomposition

Carbon oxides (CO, CO₂). Uncontrolled exothermic reaction of epoxy resins release phenolics, carbon monoxide, and water.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Gorilla Epoxy - Resin known by?

Gorilla Epoxy - Resin is also known as: Epoxy Resin

What is the hazard signal word for Gorilla Epoxy - Resin?

The signal word is warning.

What is the physical form of Gorilla Epoxy - Resin?

Gorilla Epoxy - Resin is a liquid appearing as translucent, clear . It has not available odor.

What is the solubility of Gorilla Epoxy - Resin?

Not available

What is Gorilla Epoxy - Resin used for?

Epoxy

What are the hazard statements for Gorilla Epoxy - Resin?

This substance has 4 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of Gorilla Epoxy - Resin?

The melting point is Not available and the boiling point is Not available.