GORILLA WELD RESIN

When symptoms occur: go into open air and ventilate suspected area. Obtain medical attention if breathing difficulty persists.

Symptoms: Irritation of the respiratory tract and the other mucous membranes. May be corrosive to the respiratory tract. Symptoms of respiratory complications (lung edema) may occur several hours after exposure.

Remove contaminated clothing. Immediately flush skin with plenty of water for at least 30 minutes. Obtain medical attention.

Symptoms: Causes severe irritation. May cause an allergic skin reaction.

Rinse cautiously with water for at least 60 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention.

Symptoms: Causes permanent damage to the cornea, iris, or conjunctiva.

Rinse mouth. Do NOT induce vomiting. Obtain medical attention.

Symptoms: Ingestion may cause adverse effects. May cause gastrointestinal irritation.

Dry chemical powder, alcohol-resistant foam, carbon dioxide (CO₂). Water may be ineffective but water should be used to keep fire-exposed container cool.

Do not use a heavy water stream. A heavy water stream may spread burning liquid.

Highly flammable liquid and vapor. May form flammable or explosive vapor-air mixture. When mixed with air and exposed to an ignition source, flammable vapors can burn in the open or explode in confined spaces. Being heavier than air, vapors may travel long distances to an ignition source and flash back. Runoff to sewer may cause fire or explosion hazard. Reacts violently with strong oxidizers. Increased risk of fire or explosion. The product is normally supplied in a stabilized form. If the permissible storage period and/or storage temperature is exceeded, the product may polymerize with heat evolution. Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances, and/or heavy metal ions. Product reacts violently or explosively with alkali metals, alkaline earth metals, various metal powders, strong alkalis, ammonia, and other incompatible materials. Reacts vigorously with water producing heat. Contact with metals and water liberates hydrogen.

Remove containers from fire area if this can be done without risk. Use water spray or fog for cooling exposed containers. Do not get water inside containers. Do not apply water stream directly at source of leak. In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion. Do not breathe fumes from fires or vapors from decomposition.

Evacuate unnecessary personnel. Stop leak if safe to do so. Ventilate area. Eliminate ignition sources. Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

Prevent entry to sewers and public waters. Avoid release to the environment.

Clean up spills immediately and dispose of waste safely. Eliminate all ignition sources. Absorb and/or contain spill with inert material. Do not take up in combustible material such as: saw dust or cellulosic material. Use only non-sparking tools. Transfer spilled material to a suitable container for disposal.

Materials: inert material

Do not handle until all safety precautions have been read and understood. Obtain special instructions before use. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Take precautionary measures against static discharge. Use only non-sparking tools. Do not get in eyes, on skin, or on clothing. Do not breathe mist, spray, and vapors. Use appropriate personal protection equipment (PPE).

Store only if stabilized. Store in a dry, cool place. Store in a well-ventilated place. Keep container tightly closed. Containers which are opened should be properly resealed and kept upright to prevent leakage. Protect from sunlight. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials. Keep in fireproof place. Store in original container. Store locked up.

Handle in accordance with good industrial hygiene and safety procedures.

Keep in fireproof place.

Extremely flammable liquid and vapor. May form flammable or explosive vapor-air mixture. Stabilized product.

Reacts violently with strong oxidizers. Increased risk of fire or explosion. The product is normally supplied in a stabilized form. If the permissible storage period and/or storage temperature is exceeded, the product may polymerize with heat evolution. Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances, and/or heavy metal ions. Product reacts violently or explosively with alkali metals, alkaline earth metals, various metal powders, strong alkalis, ammonia, and other incompatible materials. Reacts vigorously with water producing heat. Contact with metals and water liberates hydrogen.

This product contains components that undergo hazardous polymerization, however, they are stabilized by the other ingredients. Hazardous polymerization can occur in contact with certain incompatible materials. Hazardous polymerization may occur if the substance is not stabilized. Hazardous polymerization may occur if exposed to high temperature.

Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames, incompatible materials, and other ignition sources.

Strong acids, strong bases, strong oxidizers. Ammonia. Organic peroxides. Peroxides. Polymerization catalysts. Amines. Ultraviolet light. Light. Free radical initiators. Reducing agents. Heavy metal ions. Mineral acids. Iodides. Sulfides. Isocyanates.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.