NextSDS Logo
Safety Data Sheet EN

Gorilla Permanent Adhesive Dots

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Gorilla Permanent Adhesive Dots
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Craft

Manufacturers & Suppliers

The Gorilla Glue Company logo

The Gorilla Glue Company

manufacturer

2101 E. Kemper Road, Cincinnati, OH 45241

513-271-3300

http://www.gorillatough.com

Emergency Contacts

Prosar

1-800-420-7186

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Within the meaning of the OSHA Hazard Communication Standard [29 CFR 1910.1200]: this mixture is not considered a hazard when used in a manner which is consistent with the labeled directions.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

When symptoms occur: go into open air and ventilate suspected area. Obtain medical attention if breathing difficulty persists.

Symptoms: Prolonged exposure may cause irritation.

Skin contact

Remove contaminated clothing. Drench affected area with water for at least 5 minutes. Obtain medical attention if irritation develops or persists.

Symptoms: Prolonged exposure may cause skin irritation.

Eye contact

Rinse cautiously with water for at least 5 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention if irritation develops or persists.

Symptoms: May cause slight irritation to eyes.

Ingestion

Rinse mouth. Do NOT induce vomiting. Obtain medical attention.

Symptoms: Ingestion may cause adverse effects.

Immediate Medical Attention

If exposed or concerned, get medical advice and attention. If medical advice is needed, have product container or label at hand.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, fog, carbon dioxide (CO₂), alcohol-resistant foam, or dry chemical.

Unsuitable media

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Specific hazards

Not considered flammable but may burn at high temperatures. Product is not explosive. Reactivity: Hazardous reactions will not occur under normal conditions.

Instructions

Use water spray or fog for cooling exposed containers.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit. Ventilate area.

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Clean up spills immediately and dispose of waste safely. Recover the product by vacuuming, shoveling or sweeping. Transfer spilled material to a suitable container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Avoid prolonged contact with eyes, skin and clothing. Avoid breathing dust.

Storage

Keep container closed when not in use. Store in a dry, cool place. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials.

Hygiene

Handle in accordance with good industrial hygiene and safety procedures.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Suitable eye/body wash equipment should be available in the vicinity of any potential exposure. Ensure adequate ventilation, especially in confined areas. Ensure all national/local regulations are observed.

Hands

Wear protective gloves.

Eyes

Chemical safety goggles.

Respiratory

If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn. In case of inadequate ventilation, oxygen deficient atmosphere, or where exposure levels are not known wear approved respiratory protection.

Skin/Body

Wear suitable protective clothing. Chemically resistant materials and fabrics.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Evaporation Rate
No data available
Flammability
No data available
Physical State Data
solid
Solubility In Water
---
Vapor Pressure
No data available
Upper Explosive Limit
---
Explosive Limits
---
Voc Content
---
Colour Intensity
---
Physical State
Solid
Bulk Density
---
Appearance
Transparent
Crystallisation Point
---
Softening Point
---
Kinematic Viscosity
No data available
Boiling Point
No data available
Flash Point
No data available
Cloud Point
---
Odor
Neutral
Relative Evaporation Rate
---
Vapor Density
---
Solubility
No data available
Density
---
Solubility In Fat
---
Auto Ignition Temperature
No data available
Odor Threshold
No data available
Metal Corrosion
---
Melting Point
No data available
Dynamic Viscosity
No data available
Molecular Weight
---
Form
---
Colour
---
Ph
No data available
Lower Explosive Limit
---
Freezing Point
No data available
Decomposition Temperature
No data available
Partition Coefficient
No data available
Properties Status
---
State Under Standard Conditions
---
Relative Density
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions (see section 7).

Reactivity

Hazardous reactions will not occur under normal conditions.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Direct sunlight, extremely high or low temperatures, and incompatible materials.

Incompatible

Strong acids, strong bases, strong oxidizers.

Decomposition

Thermal decomposition may produce: Carbon oxides (CO, CO₂). Hydrocarbons. Acrid smoke and irritating fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Gorilla Permanent Adhesive Dots?

The signal word is no signal word.

What is the physical form of Gorilla Permanent Adhesive Dots?

Gorilla Permanent Adhesive Dots is a solid appearing as transparent . It has neutral odor.

What is the solubility of Gorilla Permanent Adhesive Dots?

No data available

What is Gorilla Permanent Adhesive Dots used for?

Craft

What is the melting point of Gorilla Permanent Adhesive Dots?

The melting point is No data available and the boiling point is No data available.