Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 550-1-004 known as Ablefilm 550-1-004, Epoxy adhesive
- Product Code
- 1198958
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Modified epoxy resin | --- | 30 - 60% | Yes |
| Glass, oxide, chemicals | 65997-17-3 | 10 - 30% | Yes |
| Epoxy resin | --- | 10 - 30% | Yes |
| Silica, amorphous, fumed, crystal-free | 112945-52-5 | 1 - 5% | Yes |
| Carbamide | --- | 1 - 5% | Yes |
| bis(α, α-dimethylbenzyl)peroxide | 80-43-3 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is combustible at high temperatures.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up. Scrape up as much material as possible. Store in a partly filled, closed container until disposal.
Do not allow product to enter sewer or waterways.
Scrape up as much material as possible.
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 5020-1-005 known as Ablefilm 5020-1-005 (5011)
---
LOCTITE ABLESTIK CF 3352-0075 known as Ablefilm CF3352-0075
---
LOCTITE ABLESTIK 561K-1-005 known as Ablefilm 561K-1-005, 2 x 6
---
LOCTITE ABLESTIK 517-4-007/009 known as Ablefilm 517-4-007/.009
---
LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12
---
LOCTITE ABLESTIK 84-1LMIT1 known as Ablebond 84-1LMIT1 (12.6g), Epoxy adhesive
---
LOCTITE ABLESTIK 967-1 known as Ablebond 967-1 (2.8g), Epoxy adhesive
---
LOCTITE ABLESTIK 85-1 known as Ablebond 85-1 (5011) (5g)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Extremes of temperature and direct sunlight. Heat, flames, sparks and other sources of ignition. Avoid moisture. Store away from incompatible materials.
Oxidizing agents. Reducing agents. Acids and bases. Alkalis. Ammonia. Amines. Curing agents.
Oxides of carbon. Oxides of nitrogen. Ammonia. Isocyanates. Amines. Aldehydes. Acids. Toxic fumes. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 550-1-004 known as Ablefilm 550-1-004, Epoxy adhesive?
The signal word is danger.
What is the physical form of LOCTITE ABLESTIK 550-1-004 known as Ablefilm 550-1-004, Epoxy adhesive?
LOCTITE ABLESTIK 550-1-004 known as Ablefilm 550-1-004, Epoxy adhesive is a solid, film with translucent color. It has mild odor.
What is the solubility of LOCTITE ABLESTIK 550-1-004 known as Ablefilm 550-1-004, Epoxy adhesive?
Insoluble Water
What are the hazard statements for LOCTITE ABLESTIK 550-1-004 known as Ablefilm 550-1-004, Epoxy adhesive?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE ABLESTIK 550-1-004 known as Ablefilm 550-1-004, Epoxy adhesive?
The melting point is > 150 °C (> 302°F) and the boiling point is > 150 °C (> 302°F).