Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 551-009 known as Ablefilm 551-009
- Product Form
- Adhesive
- Product Code
- 1199539
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diglycidyl resorcinol ether | 101-90-6 | 10 - 30% | Yes |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 570-1-005 known as Ablefilm 570-1-005 (5011)
---
LOCTITE ABLESTIK 5020-1-005 known as Ablefilm 5020-1-005 (5011)
---
LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011)
---
LOCTITE ABLESTIK 5025E-004 known as Ablefilm 5025E-004 (5011)
---
LOCTITE ABLESTIK 517-4-007/009 known as Ablefilm 517-4-007/.009
---
LOCTITE ABLESTIK 550-1-005 known as Ablefilm 550-1-005, Epoxy
---
LOCTITE ABLESTIK CF 3352-0075 known as Ablefilm CF3352-0075
---
LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Do not inhale vapors and fumes. Avoid contact with eyes, skin and clothing. Wash hands before breaks and immediately after handling the product. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash hands before breaks and immediately after handling the product.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Excessive heat.
Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Oxides of carbon. Oxides of nitrogen. Irritating vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 551-009 known as Ablefilm 551-009?
The signal word is danger.
What is the physical form of LOCTITE ABLESTIK 551-009 known as Ablefilm 551-009?
LOCTITE ABLESTIK 551-009 known as Ablefilm 551-009 is a solid, film with white color. It has odorless odor.
What are the hazard statements for LOCTITE ABLESTIK 551-009 known as Ablefilm 551-009?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of LOCTITE ABLESTIK 551-009 known as Ablefilm 551-009?
The melting point is Not available. and the boiling point is Not available..