Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK ICP 8282 LS 30CC
- Product Code
- 3154748
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Acrylate adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silver | 7440-22-4 | 30 - 60% | Yes |
| Isobornyl acrylate | 5888-33-5 | 10 - 30% | Yes |
| hexamethylene diacrylate | 13048-33-4 | 10 - 30% | Yes |
| Acrylate ester | 7328-17-8 | 1 - 5% | Yes |
| Reaction products of 2-hydroxyethylmethacrylate and diphosphorus pentaoxide | 1187441-10-6 | 1 - 5% | Yes |
IDH number: 3154748 Product name: LOCTITE ABLESTIK ICP 8282 LS 30CC SY
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 8290 4.47/10CC SY
---
LOCTITE ABLESTIK NCA 2350 30CC
---
LOCTITE ABLESTIK 8200TI
---
LOCTITE ABLESTIK ABP 2025DSINP 10CC SY
---
LOCTITE ABLESTIK NCA 2286AG 30ML SY
---
LOCTITE ABLESTIK CE 3103WLV
---
LOCTITE ABLESTIK CDF 530P12C_20
---
LOCTITE ABLESTIK XCE3111 2.7CC/10CC SY
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.
Store between -22 °C (-7.6 °F) and -18 °C (0.4 °F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s).
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
May occur with excessive aging, excessive heat, polymerization catalyst, inhibitor depletion, direct sunlight and under oxygen-free atmospheres.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Loss of dissolved air. Loss of polymerization inhibitor.
Strong oxidizing agents. Strong reducing agents. Strong acids and strong bases. Free radical initiators. Inert gases. Oxygen scavengers. Peroxides. Iron. Rust. Copper. Copper alloys.
Oxides of carbon. Oxides of nitrogen. Oxides of Metals in Section 3. Hydrogen cyanide. Isocyanates. Amines. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK ICP 8282 LS 30CC?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK ICP 8282 LS 30CC?
LOCTITE ABLESTIK ICP 8282 LS 30CC is a liquid with silver color. It has acrylic odor.
What is LOCTITE ABLESTIK ICP 8282 LS 30CC used for?
Acrylate adhesive
What are the hazard statements for LOCTITE ABLESTIK ICP 8282 LS 30CC?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE ABLESTIK ICP 8282 LS 30CC?
The melting point is Not available. and the boiling point is Not available..