LOCTITE ABLESTIK ABP 2053SNP 30CC SY

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.

Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.

Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.

Water spray (fog), foam, dry chemical or carbon dioxide.

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away.

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Do not allow product to enter sewer or waterways.

Ensure adequate ventilation. Remove all sources of ignition. Keep unnecessary personnel away. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Use only with adequate ventilation. Remove all sources of ignition. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Wear suitable protective clothing, safety glasses and gloves. See Section 8 of the SDS for Personal Protective Equipment. When using do not eat, drink or smoke. Keep container closed.

Store at or below -40 °C (-40°F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in a dry place. Avoid moisture. Keep away from heat, spark and flame. Store in original container until ready to use. Store away from incompatible materials identified in section 10. Protect from direct sunlight. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s).

Wash thoroughly after handling. When using do not eat, drink or smoke.

Remove all sources of ignition. Keep away from heat, spark and flame.

Use local exhaust ventilation if the potential for airborne exposure exists.

Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists. Safety showers and eye wash stations should be available.

Use a NIOSH approved respirator if ventilation is inadequate.

Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.

Stable under normal conditions of storage and use.

Not available.

May occur with excessive aging, excessive heat, polymerization catalyst, inhibitor depletion, direct sunlight and under oxygen-free atmospheres.

Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Loss of polymerization inhibitor. Loss of dissolved air.

Oxidizing agents. Reducing agents. Acids. Bases. Amines. Peroxides. Free radical initiators. Inert gases. Oxygen scavengers. Reactive metals.

Oxides of carbon. Oxides of silicon. Phenolics. Butadiene. Maleic anhydride. Toxic fumes. Irritating vapors.