Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM 9800 POST LUBRICANT PA16KG
- Product Code
- 2737720
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic (not cmr) | 64742-54-7 | 60 - 80% | Yes |
| Fatty acid ester | --- | 10 - 30% | Yes |
| Stearic acid ester | --- | 10 - 30% | Yes |
| Phosphate Ester | --- | 1 - 5% | Yes |
IDH number: 2737720 Product name: BONDERITE L-FM 9800 POST LUBRICANT PA16KG
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
Flush eye(s) immediately with plenty of water.
Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist. Obtain medical attention if irritation persists. If eye irritation persists, consult a specialist. Seek medical advice.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FM 560 FORMING LUBRICANT
---
BONDERITE L-FM F P 1212 AN STAMPING LUBRICANT
---
BONDERITE L-FM PL-A POST LUBRICANT ACHESON
---
BONDERITE L-FG 180 ACHESON SYNTHETIC FORGING LUBRICANT
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
BONDERITE L-FM 580 ACHESON DR204KG
---
BONDERITE M-NT 2040 R2 PA22KG
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only. Launder work clothes frequently. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store away from water, steam, ice, heat, oxidizing agents, and acids. Protect from freezing.
Wash thoroughly after handling. Launder work clothes frequently.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Avoid excessive heat and ignition sources.
This product may react with strong oxidizing agents. This product may react with strong reducing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of phosphorus.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM 9800 POST LUBRICANT PA16KG?
The signal word is warning.
What is the physical form of BONDERITE L-FM 9800 POST LUBRICANT PA16KG?
BONDERITE L-FM 9800 POST LUBRICANT PA16KG is a liquid with light amber color. It has mild odor.
What is BONDERITE L-FM 9800 POST LUBRICANT PA16KG used for?
Lubricant
What are the hazard statements for BONDERITE L-FM 9800 POST LUBRICANT PA16KG?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-FM 9800 POST LUBRICANT PA16KG?
The melting point is 0 °C (32°F) and the boiling point is Not determined.