Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM PL-A POST LUBRICANT ACHESON
- Product Code
- 2752144
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), solvent-dewaxed heavy paraffinic < 3%DMSO | 64742-65-0 | 30 - 60% | Yes |
| Aryl phosphate | --- | 1 - 5% | Yes |
IDH number: 2752144 Product name: BONDERITE L-FM PL-A POST LUBRICANT ACHESON Page 2 of 5
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.
Flush eye(s) immediately with plenty of water. If eye irritation persists, consult a specialist.
Seek medical advice. Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation); Obtain medical attention if irritation persists (skin); consult a specialist (eye); Seek medical advice (ingestion).
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways. Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 855 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 180 ACHESON SYNTHETIC FORGING LUBRICANT
---
BONDERITE L-FM TRLEX ACHESON
---
BONDERITE L-FM 460 ACHESON
---
BONDERITE L-FM 12010 ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only. Launder work clothes frequently. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.
Store between 5 °C (41°F) and 50 °C (122°F). Store between 40°F and 100°F. (5° and 38°C). Store away from water, steam, ice, heat, oxidizing agents, and acids.
Wash thoroughly after handling. Launder work clothes frequently.
Do not heat or weld containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Avoid excessive heat and ignition sources.
This product may react with strong oxidizing agents. Acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM PL-A POST LUBRICANT ACHESON?
The signal word is warning.
What is the physical form of BONDERITE L-FM PL-A POST LUBRICANT ACHESON?
BONDERITE L-FM PL-A POST LUBRICANT ACHESON is a liquid with amber color. It has mild odor.
What is BONDERITE L-FM PL-A POST LUBRICANT ACHESON used for?
Lubricant
What are the hazard statements for BONDERITE L-FM PL-A POST LUBRICANT ACHESON?
This substance has 1 hazard statement:
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-FM PL-A POST LUBRICANT ACHESON?
The melting point is Not determined and the boiling point is > 175 °C (> 347°F)calculated.