Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Intaglio Printmaker - Easy Wipe Compound
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Printing aid for printing inks
Manufacturers & Suppliers
Intaglio Printmaker
manufacturer
9 Playhouse Court, 62 Southwark Bridge Road, London, SE1 0AT
+44 (0) 207 928 2633
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product is a preparation of white mineral oil and auxiliary agents.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| white mineral oil EC: 232-455-8 | 8042-47-5 | --- | No |
| auxiliary agents EC: 271-893-4 | 68611-44-9 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim immediately from source of exposure. Place unconscious person on the side in the recovery position and ensure breathing. Get medical attention.
Remove contaminated clothing. Wash the skin immediately with soap and water. Get medical attention if any discomfort continues.
Promptly wash eyes with plenty of water while lifting the eye lids. Make sure to remove any contact lenses from the eyes before rinsing. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
Do not induce vomiting. When risk of unconsciousness, place and transport the victim in secured side position. Drink plenty of water. Do not give victim anything to drink if he is unconscious. Get medical attention immediately.
Immediate Medical Attention
Get medical attention for inhalation, ingestion, or if discomfort continues after skin or eye contact.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, fog or mist. Foam: Carbon dioxide (CO2). Dry chemicals, sand, dolomite etc.
Avoid breathing fire vapours. Use water to keep fire exposed containers cool and disperse vapours.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if possible without risk.
Protect drains by covering to avoid any spillage entering the drainage system.
Absorb in vermiculite, dry sand or earth and place into containers.
Materials: vermiculite, dry sand or earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not use in confined spaces without adequate ventilation and/or respirator. Eliminate all sources of ignition. Keep away from heat, sparks and open flame. Avoid inhalation of vapours.
Keep in cool, dry, ventilated storage and closed containers. Keep away from heat, sparks and open flame.
Eliminate all sources of ignition. Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Must not be handled in confined space without sufficient ventilation.
Chemical resistant gloves required for prolonged or repeated contact. Use protective gloves made of impermeable material.
Wear approved safety goggles.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No particular stability concerns.
Heat, sparks, flames.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Intaglio Printmaker - Easy Wipe Compound?
The signal word is danger.
What is the physical form of Intaglio Printmaker - Easy Wipe Compound?
Intaglio Printmaker - Easy Wipe Compound is a paste-like appearing as paste-like with colourless. color. It has mild (or faint). odor.
What is the solubility of Intaglio Printmaker - Easy Wipe Compound?
Immiscible with water. Miscible with: Organic solvents (most).
What is Intaglio Printmaker - Easy Wipe Compound used for?
Printing aid for printing inks
What are the hazard statements for Intaglio Printmaker - Easy Wipe Compound?
This substance has 2 hazard statements:
- EUH066: Repeated exposure may cause skin dryness or cracking.
- H304: Harmful: may cause lung damage if swallowed.