Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Intaglio Printmaker Traditional Relief Inks (Linseed oil-based)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Printing inks
Manufacturers & Suppliers
Intaglio Printmaker
manufacturer
9 Playhouse Court, 62 Southwark Bridge Road, London, SE1 0AT
+44 (0) 207 928 2633
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The preparation may contain the following sensitizing substances in quantities below the labelling limit (1%): Hydroquinone and cobaltcarboxylate. May cause an allergic reaction
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air, keep the patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration. Give nothing by mouth. If unconscious, place in the recovery position and seek medical advice.
Remove contaminated clothing. Wash skin thoroughly with soap and water or use a proprietary skin cleaner.
Contact lenses should be removed. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart, and seek medical advice.
If accidentally swallowed, obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention. If unconscious, place in the recovery position and seek medical advice. If accidentally swallowed, obtain immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, CO2, powder
water jet
Fire will produce dense black smoke. Decomposition products may be a hazard to health.
Cool containers exposed to fire with water.
Firefighter Protection
Appropriate self-contained breathing apparatus may be required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Exclude sources of ignition and provide adequate ventilation. Avoid breathing of vapours.
Do not allow to enter drains or water courses.
Clean preferably with a detergent; avoid the use of solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep the container tightly closed. Exclude sources of heat, sparks and open flame. Avoid skin and eye contact. Avoid inhalation of vapour and spray mist. Never use pressure to empty the container. The container is not a pressure vessel. Always keep in containers made of the same material as the supplied container.
Store between 4 and 30 degrees C in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. Containers which are opened should be properly resealed and kept upright to prevent leakage.
Smoking, eating and drinking should be prohibited in areas of storage and use. Follow the rules of labour protection.
Exclude sources of heat, sparks and open flame. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction.
When skin exposure may occur, advice should be sought from glove suppliers on appropriate types. Barrier creams may help to protect exposed areas of the skin. They should not be applied once exposure has occurred.
Eye protection designed to protect against liquid splashes should be worn.
Not applicable.
Protection clothing should be worn by the personnel
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under the recommended storage and handling conditions.
Exothermic reaction may occur if in contact with oxidising agents, strongly alkaline or strongly acidic materials.
high temperatures
oxidising agents, strongly alkaline materials, strongly acidic materials
smoke, carbon monoxide, carbon dioxide and oxides of nitrogen
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
No data available
12.6 Endocrine disrupting properties
No data available
12.7 Other adverse effects
No data available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Wastes and emptied containers should be disposed of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is not classified as dangerous within the meaning of the EC Directive 99/45/EC.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Intaglio Printmaker Traditional Relief Inks (Linseed oil-based)?
The signal word is no signal word.
What is the physical form of Intaglio Printmaker Traditional Relief Inks (Linseed oil-based)?
Intaglio Printmaker Traditional Relief Inks (Linseed oil-based) is a paste .
What is Intaglio Printmaker Traditional Relief Inks (Linseed oil-based) used for?
Printing inks