NextSDS Logo
Safety Data Sheet EN

TEROSON MS 647 BK HO25KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON MS 647 BK HO25KG
Product Code
2985286

Regulatory Identifiers

CAS Number
N/A

Identified Uses

adhesive and sealant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Repr. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H361 SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate 471-34-1 30 - 60% Yes
Carbon black - Nano 1333-86-4 1 - 5% Yes
Trimethoxyvinylsilane 2768-02-7 0.1 - 1% Yes
Methanol 67-56-1 0.1 - 1% Yes
Bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate 52829-07-9 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Immediately remove victim to fresh air.

Skin contact

Rinse with running water and soap.

Eye contact

Rinse immediately with plenty of running water (for 10 minutes).

Ingestion

Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention (for inhalation and ingestion). Seek medical attention if necessary (for eye contact). If adverse health effects develop seek medical attention (for skin contact).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

carbon dioxide, foam, powder, water spray jet, fine water spray

Unsuitable media

Not available.

Specific hazards

In case of fire toxic gases can be released.

Instructions

Wear self-contained breathing apparatus. Wear protective equipment.

Firefighter Protection

Wear self-contained breathing apparatus. Wear protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not empty into drains / surface water / ground water.

Cleanup methods

Remove mechanically.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. Use caution when combining with water; DO NOT add water to acid, ALWAYS add acid to water while stirring to prevent release of heat, steam and fumes. Do not take internally. For industrial use only.

Storage

Ensure adequate ventilation. Store in sealed original container. Store in a dry place.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Relative Evaporation Rate
---
Ph
Not applicable, Product reacts with water.
Form
---
Boiling Point
> 300 °C (> 572°F)
Melting Point
Not applicable, Determination technically not possible
Physical State Data
liquid
Lower Explosive Limit
Not available.
Vapor Density
---
Voc Content
Not available.
Colour
Black
Decomposition Temperature
Not available.
Solubility
Polymerises in presence of water.
Partition Coefficient
Not available.
Metal Corrosion
---
Upper Explosive Limit
Not available.
Colour Intensity
---
Flammability
Not applicable
Evaporation Rate
---
Appearance
---
Odor
alcohol-like
Solubility In Fat
---
Relative Density
---
Physical State
Solid
Softening Point
---
Kinematic Viscosity
Not available.
Dynamic Viscosity
180 - 310 Pa*s
State Under Standard Conditions
---
Vapor Pressure
< 0.1 hPa (20 °C (68°F))
Auto Ignition Temperature
Not available.
Cloud Point
---
Properties Status
---
Molecular Weight
---
Flash Point
Not applicable
Odor Threshold
Not available.
Density
---
Freezing Point
---
Explosive Limits
---
Crystallisation Point
---
Bulk Density
---
Solubility In Water
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

None if used for intended purpose.

Incompatible

None if used for intended purpose.

Decomposition

No decomposition if used according to specifications.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON MS 647 BK HO25KG?

The signal word is warning.

What is the physical form of TEROSON MS 647 BK HO25KG?

TEROSON MS 647 BK HO25KG is a solid with black color. It has alcohol-like odor.

What is the solubility of TEROSON MS 647 BK HO25KG?

Polymerises in presence of water.

What is TEROSON MS 647 BK HO25KG used for?

adhesive and sealant

What are the hazard statements for TEROSON MS 647 BK HO25KG?

This substance has 3 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

What is the melting point of TEROSON MS 647 BK HO25KG?

The melting point is Not applicable, Determination technically not possible and the boiling point is > 300 °C (> 572°F).