NextSDS Logo
Safety Data Sheet EN

TEROSON MS 9380 WH HO25KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON MS 9380 WH HO25KG
Product Form
adhesive and sealant
Product Code
2969758

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Repr. Cat. 2 H361

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H361 SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P280 Wear protective gloves, clothing, eye and face protection.
P308 + P313 IF exposed or concerned: Get medical attention.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate 471-34-1 30 - 60% Yes
Titanium dioxide 13463-67-7 5 - 10% Yes
Silica, amorphous, fumed, cryst.-free 112945-52-5 1 - 5% Yes
Bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate 52829-07-9 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Wipe off with paper towel or cloth. Rinse with running water and soap. Remove contaminated clothing and shoes. Seek medical attention immediately. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Seek medical attention immediately.

Immediate Medical Attention

Seek medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, dry chemical or carbon dioxide. Water spray or fog.

Unsuitable media

Not available.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Scrape up spilled material and place in a closed container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wear suitable protective clothing, safety glasses and gloves. Keep container closed.

Storage

Keep in a cool, well ventilated area. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling. Do not wear contact lenses.

Fire prevention

Remove all sources of ignition. Keep away from heat, sparks and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
---
Boiling Point
> 250 °C (> 482°F) Boiling point
Solidification Point
---
Evaporation Rate
Not available.
Colour
White
Cloud Point
---
Form
---
Flash Point
Not applicable
Density
1.43 - 1.49
Voc Content
1.26 %; 18.8 g/l
Melting Point
Not applicable, Determination technically not possible
Bulk Density
---
Physical State
solid
Properties Status
---
Appearance
---
Softening Point
---
Solubility
Reacts with water. Water
Dynamic Viscosity
130 - 220 Pa*s
Lower Explosive Limit
Not available.
Odor Threshold
Not available.
Solubility In Fat
---
Flammability
Not applicable
Physical State Data
solid
Explosive Limits
---
Upper Explosive Limit
Not available.
Vapor Pressure
0.026 hPa (20 °C (68°F)) no method / method unknown
State Under Standard Conditions
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Relative Evaporation Rate
---
Odor
Alcohol
Relative Density
1.43 - 1.49
Metal Corrosion
---
Freezing Point
---
Molecular Weight
---
Partition Coefficient
Not available.
Kinematic Viscosity
Not available.
Vapor Density
---
Ph
Not applicable, Product reacts with water.
Crystallisation Point
---
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

Acids and bases. Oxidizing agents.

Decomposition

Oxides of carbon. Irritating vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON MS 9380 WH HO25KG?

The signal word is warning.

What is the physical form of TEROSON MS 9380 WH HO25KG?

TEROSON MS 9380 WH HO25KG is a solid with white color. It has alcohol odor.

What is the solubility of TEROSON MS 9380 WH HO25KG?

Reacts with water. Water

What are the hazard statements for TEROSON MS 9380 WH HO25KG?

This substance has 1 hazard statement:

  • H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

What is the melting point of TEROSON MS 9380 WH HO25KG?

The melting point is Not applicable, Determination technically not possible and the boiling point is > 250 °C (> 482°F) Boiling point.