Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE TEMPERKOTE 850 18 WH 5G
- Product Form
- Paint
- Product Code
- 3088626
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xylenes | 1330-20-7 | 30 - 60% | Yes |
| Titanium dioxide < 1% particles with diameter ≤ 10 μm | 13463-67-7 | 10 - 30% | Yes |
| Ethylbenzene | 100-41-4 | 1 - 5% | Yes |
| Mica | 12001-26-2 | 1 - 5% | Yes |
| Aluminium hydroxide | 21645-51-2 | 1 - 5% | Yes |
| Quaternary ammonium compounds, bis(hydrogenated tallow alkyl)dimethyl, chlorides, compds. with hectorite | 71011-27-3 | 0.1 - 1% | Yes |
| Toluene | 108-88-3 | 0.1 - 1% | Yes |
| 2-ethylhexanoic acid, zirconium salt | 22464-99-9 | 0.1 - 1% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
| Methanol | 67-56-1 | 0.1 - 1% | Yes |
| Cobalt octoate | 136-52-7 | 0.1 - 1% | Yes |
| 2-butanone oxime | 96-29-7 | 0.1 - 1% | Yes |
| Cumene | 98-82-8 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Contains flammable solvent. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Remove all sources of ignition. Ensure adequate ventilation. Isolate area. Keep unnecessary personnel away. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid generating static electricity while handling. Use proper grounding procedures when handling near flammable or explosive materials. Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed. See Section 8 of the SDS for Personal Protective Equipment.
Protect from direct sunlight. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Store in original container until ready to use.
Wash thoroughly after handling. Prevent contact with eyes, skin and clothing.
Avoid generating static electricity while handling. Use proper grounding procedures when handling near flammable or explosive materials. Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
High temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Avoid static discharge. Protect from direct sunlight. Avoid moisture.
Oxidizing agents. Acids and bases. Metals. Halogens. Alkalis.
Silica will dissolve in hydrofluoric acid and produce a corrosive gas - silicon tetrafluoride, may cause fires. Oxides of carbon. Oxides of sulfur. Metal oxide fumes. Hydrocarbons. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- Paint
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE TEMPERKOTE 850 18 WH 5G?
The signal word is danger.
What is the physical form of LOCTITE TEMPERKOTE 850 18 WH 5G?
LOCTITE TEMPERKOTE 850 18 WH 5G is a liquid with white color. It has aromatic odor.
What is the solubility of LOCTITE TEMPERKOTE 850 18 WH 5G?
Not available.
What are the hazard statements for LOCTITE TEMPERKOTE 850 18 WH 5G?
This substance has 9 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOUR.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H350: MAY CAUSE CANCER.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE TEMPERKOTE 850 18 WH 5G?
The melting point is Not available. and the boiling point is Not available..