Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g)
- Product Code
- 1200972
- Synonyms
- Abletherm AA01
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Silicone adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silver | 7440-22-4 | 80 - 100% | Yes |
| Cyclosiloxanes,3a,4,5,6,7,7a-hexahydro-4,7-methano-1H-inden-5-yl Me, Me hydrogen | --- | 5 - 10% | Yes |
| Toluene | 108-88-3 | 0.1 - 1% | Yes |
| Platinate(2-), hexachloro-, (OC-6-11)-, dihydrogen, reaction productswith 2,4,6,8-tetraethenyl-2,4,6,8-tetramethylcyclotetrasiloxane | 68585-32-0 | 0.1 - 1% | Yes |
IDH number: 1200972 Product name: LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g)
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Isolate area. Keep unnecessary personnel away. Scrape up spilled material and place in a closed container for disposal. Store in a partly filled, closed container until disposal.
Materials: closed container
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 8600 known as Abletherm 8600 (22g)
---
LOCTITE ABLESTIK 8600 known as Abletherm 8600 (22g)
---
LOCTITE ABLESTIK 12-2 known as Abletherm 12-2 (21g)
---
LOCTITE ABLESTIK 2600BT known as Abletherm 2600BT (9.3g)
---
LOCTITE ECCOBOND MC 723 known as Ablebond MC723 (46.5g)
---
LOCTITE ECCOBOND 334-1 known as Ablebond 334-1
---
LOCTITE ECCOBOND LUX AA50T known as Ablelux AA50T (4.5g), Adhesive
---
LOCTITE ECCOBOND AA 3708
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Avoid contact with eyes, skin and clothing. Do not breathe gas/fumes/vapor/spray. Wash thoroughly after handling. Refer to Section 8.
For safe storage, store at or below -40 °C (-40°F) Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Protect from direct sunlight.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Store away from incompatible materials.
Strong oxidizing agents. Strong acids and strong bases. Ammonia. Peroxides.
Oxides of carbon. Oxides of Metals in Section 3. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- RQ, Environmentally hazardous substance, solid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g) known by?
LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g) is also known as: Abletherm AA01
What is the hazard signal word for LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g)?
The signal word is danger.
What is the physical form of LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g)?
LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g) is a solid with gray color. It has aromatic odor.
What is LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g) used for?
Silicone adhesive
What are the hazard statements for LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g)?
This substance has 3 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE ECCOBOND AA 01 known as Abletherm AA01 (45g)?
The melting point is Not available. and the boiling point is Not available..