NextSDS Logo
Safety Data Sheet EN

BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER
Product Code
594399

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1 H314
Eye Dam. Cat. 1 H314

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Potassium hydroxide 1310-58-3 10 - 30% No
Tetrapotassium pyrophosphate 7320-34-5 1 - 5% No
Poly(oxy-1,2-ethanediyl), .alpha.-{4-(1,1,3,3-tet 9002-93-1 1 - 5% No

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air.

Skin contact

Immediately wash skin thoroughly with soap and water.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting.

Immediate Medical Attention

Get medical attention (inhalation, skin contact). Seek immediate medical attention (eye contact). Get immediate medical attention (ingestion).

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing mists or aerosols of this product. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Ship and store above 40° F. Protect from freezing.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Crystallisation Point
---
State Under Standard Conditions
---
Colour Intensity
---
Melting Point
Not determined
Lower Explosive Limit
Not determined
Cloud Point
---
Vapor Pressure
Not determined
Voc Content
Not available.
Vapor Density
---
Relative Evaporation Rate
---
Solubility In Fat
---
Form
---
Bulk Density
---
Flammability
Not applicable
Relative Density
---
Odor Threshold
Not available.
Physical State Data
liquid
Ph
> 13
Flash Point
Not applicable
Softening Point
---
Auto Ignition Temperature
Not determined
Solubility
Complete Water
Boiling Point
> 100 °C (> 212°F) Aqueous solution
Solidification Point
---
Molecular Weight
---
Decomposition Temperature
Not available.
Physical State
Liquid
Density
1.2 - 1.3 at 15.6 °C (60.08 °F)
Dynamic Viscosity
Not available.
Colour
Amber to yellowish
Upper Explosive Limit
Not determined
Evaporation Rate
Not available.
Metal Corrosion
---
Explosive Limits
---
Partition Coefficient
Not determined
Appearance
---
Kinematic Viscosity
Not available.
Odor
Mild
Solubility In Water
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product reacts with acids. Adding water to this product may cause localized overheating and splattering.

Decomposition

None identified.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3266
Shipping Name
Corrosive liquid, basic, inorganic, n.o.s. (Potassium hydroxide, Tetrapotassium pyrophosphate)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER?

The signal word is danger.

What is the physical form of BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER?

BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER is a liquid with amber to yellowish color. It has mild odor.

What is the solubility of BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER?

Complete Water

What is BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER used for?

Cleaner

What are the hazard statements for BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER?

This substance has 2 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-AK 2819 ALKALINE CLEANER known as AQUENCE 2819 CLEANER?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) Aqueous solution.